cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

4660
Views
10
Helpful
23
Replies
Highlighted
Cisco Employee

Ask the Expert:Managing your Converged Network Using Cisco Prime

 Is there a way to decouple the database from PI ? that way our deployment would be way more scalable.

Currently there is no way to decouple database from PI.   I haven't seen any plans to do so yet.

Also it would be great to know if PI supports two or more NICs, just like Iris de Boer asked above.

Please see the thread above where I have replied to this.

Highlighted

Ask the Expert:Managing your Converged Network Using Cisco Prime

Dear Tejas,

I installed Cisco Prime Infrastructure 2.1 for 60-days evaluation and i added routers, switches and APs. I configured SNMP community and telnet credentials. I can see clients on Dashboard, but when i go to reports and generate them for last hour, it displays "None Detected".

Did i miss something?

Please advise.

Moustafa

Highlighted
Cisco Employee

Ask the Expert:Managing your Converged Network Using Cisco Prime

Good observation Moustafa,

I did run a client count report for last one hour and I was able to generate the report.   I need to know more specifics like What report are you running? what type of clients are you selecting?   Do you see those clients associated or connected in the "clients and users" dashboard?  Please advise, and I can look into this even after this event ends..

best regards,

Tejas

Highlighted
Beginner

Ask the Expert:Managing your Converged Network Using Cisco Prime

Dear Tejas Shah,

Can you provide good guide how to add cisco routers,switchs to PU 1.2

I have problem: i added switch, but i just see its name on page Operate/Device Work center and it shows that Managed. But all dashboards are empty. All documentations are for old versions.

Please, provide normal step by step guide for configuration Prime Infrastructure.


Highlighted
Hall of Fame Guru

Ask the Expert:Managing your Converged Network Using Cisco Prime

There is a very nice deployment guide for PI 1.2 with step by step procedure posted here:

http://www.cisco.com/en/US/customer/products/ps12239/prod_white_papers_list.html

Highlighted
Beginner

Ask the Expert:Managing your Converged Network Using Cisco Prime

And it doesn't work with snmp v3..

Highlighted
Hall of Fame Guru

Ask the Expert:Managing your Converged Network Using Cisco Prime

Cisco Prime Infrastructure supports all versions of SNMP: v1, v2c, and v3 (noAuthNoPriv, authNoPriv, authPriv).

Highlighted
Cisco Employee

Re: Ask the Expert:Managing your Converged Network Using Cisco P

That is correct Marvin.. Just a side note.  We had some issues initially with PI 1.1 and SNMPv3, but we had successfully used PI 1.2.1 with SNMPv3 at Ciscolive UK couple weeks back, and it worked great.

Highlighted
Beginner

Ask the Expert:Managing your Converged Network Using Cisco Prime

I'd like to know if there are any known interoperability issues when attempting to manage access switches/stacks as every 3750x running lanbase and 2960 comes up as "Managed with Warnings". Our cores running IPServices are managed with no issues. It says to see the inventory.log file, but the erro thrown is nonsensical.

"

2012-12-12 10:39:44,143 [ICE Service[ 1]Thread: 6] ERROR inventory - For device id: 27030006 Feature = feature_vlan and Procedure = vlan failed in time 4254 with the following error and continuing with other features: com.cisco.nm.expression.function.FunctionException: 27030006VALIDATION_ERRORFailed to validate output XML: cvc-complex-type.2.4.a: Invalid content was found starting with element 'name'. One of '{vlanId, type, ifSpeed, isPromiscuous, isConnectorPresent, entAliasMappingIdentifier, adminStatus, operStatus, mtu, lagEndName, locationIndex, comments, description}' is expected.http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="vlaninterface/xmp-im-vlan-module.xsd">Vlan11Vlan99VlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlanVlan99

I've This was an issue from the first deployment of PI 1.2 and continues in version 1.2.1.012.

CreatePlease to create content
Content for Community-Ad