cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1548
Views
0
Helpful
4
Replies

ASR-920-12SZ-IM Boot failed restarting

octavio silva
Level 1
Level 1

Hi every one.

I have a ASR920 that is continuous on rebooting. For some extrange reason it says there's no SDcard, but o have tested the SD on another ASR and it works, also i have inserted a SD of a working ASR and the boot log keeps saying there's no SD Card.

 

Also i'm unable to get to ROMMON (not able to break the startup), so that i could work around and boot from a USB Flash or from TFTP server.

 

We had a power failure and the switch got crazy, after what i took the opportunnity to upgrade the firmware like i have made on many other equipments after some failure...and there started the nightmare.  

 

I've attached the file with message error.

 

System Bootstrap, Version 15.6(9r)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2016 by cisco Systems, Inc.
Compiled Tue 12-Jan-16 20:04 by ccai
Starting Initialization of FMAN0
Loading ucode for FMAN0, size: 31424, ver: 106.04.14
Silicon Rev Major:Minor [1:1]
Initializing the pci..
IOFPGA version[17082912]
Boot ROM0
Last reset cause: BootFromUpgradeRegFail
SD card is not presentUEA platform with 1048576 Kbytes of main memory

Resetting upgrade counter from failed upgrade
ERROR: command complete not receivedESDHC Reg Dump: ERR
BLKATTR=0x00010000
CMDARG=0x00000000
XFERTYP=0x123a0037
PRSSTAT=0x0f8d0009
CMDRSP0=0x00000000
CMDRSP1=0x00000000
CMDRSP2=0x00000000
CMDRSP3=0x00000000
PROCTL=0x00000020
SYSCTL=0x000e0008
IRQSTATEN=0x377f11ff
IRQSTAT=0x00000040
IRQSIGEN=0x00000000
WML=0x00100010
HOSTCAPBLT=0x37f20000
File system not supported
boot: error executing "boot asr920igp-universalk9.16.06.06.SPA.bin"
autoboot: boot failed, restarting...

System Bootstrap, Version 15.6(9r)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2016 by cisco Systems, Inc.
Compiled Tue 12-Jan-16 20:04 by ccai
Starting Initialization of FMAN0
Loading ucode for FMAN0, size: 31424, ver: 106.04.14
Silicon Rev Major:Minor [1:1]
Initializing the pci..
IOFPGA version[17082912]
Boot ROM0
Last reset cause: BootFromUpgradeRegFail
SD card is not presentUEA platform with 1048576 Kbytes of main memory

4 Replies 4

marce1000
VIP
VIP

 

 FYI : https://community.cisco.com/t5/network-management/last-reset-cause-bootfromupgraderegfail/m-p/4157686

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Unfortunately not possible to solve. the workaround would be good if i
could break startup, entering ROMMON but is over and over on reboot.




octavio silva
Level 1
Level 1

No solution, no workaround since reset button does nothing and break (Teraterm, putty, etc.,) does not take effect and cannot access to Rommon. 

 

         - Try to remove the SD-card and or  re-seat it.

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: