cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
179
Views
5
Helpful
4
Replies
Highlighted
Beginner

ASR1002 no load IOS after reboot

Hello guys,

 

We have a problem. We download new IOS for asr1002-x in bootflash asr1002x-universalk9.16.03.08.SPA.bin

We confirm that the Checksum and Hash is ok but when I reboot the router. it load the old IOS.

We try with this Config but no result

Can you Help me please?

boot-start-marker
boot system bootflash:asr1002x-universalk9.16.03.08.SPA.bin
boot system flash bootflash:asr1002x-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin
boot-end-marker

 

and

 

boot-start-marker
boot system flash bootflash:asr1002x-universalk9.16.03.08.SPA.bin
boot system flash bootflash:asr1002x-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin
boot-end-marker

 

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Community Legend

Re: ASR1002 no load IOS after reboot


@Neobt wrote:

Do you refer to this?                


Go HERE and scroll down to Table 3.  

ROMmon upgrade is required, a minimum of15.5(3r)S1, if you want to go to 16.3.X and my recommendation is to upgrade ROMmon straight to 16.7(1r).

4 REPLIES 4
Hall of Fame Community Legend

Re: ASR1002 no load IOS after reboot

Wait ... that's going from 3.X to 16.X ...
Did you upgrade the ROMmon?
Beginner

Re: ASR1002 no load IOS after reboot

Do you refer to this?

 

Slot      CPLD Version        Firmware Version                       
--------- ------------------- ---------------------------------------
0         14012203            15.3(1r)S                          
R0        14012203            15.3(1r)S                          
F0        14012203            15.3(1r)S                          

Hall of Fame Community Legend

Re: ASR1002 no load IOS after reboot


@Neobt wrote:

Do you refer to this?                


Go HERE and scroll down to Table 3.  

ROMmon upgrade is required, a minimum of15.5(3r)S1, if you want to go to 16.3.X and my recommendation is to upgrade ROMmon straight to 16.7(1r).

Beginner

Re: ASR1002 no load IOS after reboot

Thank you very much for your quick response!!!!

 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards