cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1117
Views
0
Helpful
2
Replies

Automatic FTP config transfer.

boldobaldo
Level 1
Level 1

Hi all, 
I need to have an automatic sistem config backup. 
I tried to create an user that have ssh access. 
From an external FTP server, i've created a script that logs in the switch and give the command "copy running-config tftp://x.x.x.x". 
But it don't works. 
I see this error comes back:  "Line has invalid autocommand "copy running-config tftp://10.139.251.175".

What i can do? 

Thanks. 
BB. 

 

1 Accepted Solution

Accepted Solutions

you can use below methods.

1.

copy running-config ftp://put_user_name_here:put_password_here@put_machie_name_or_ip_here//home/users/some_location/ut-running-config.txt

 2.

sw(config)#file prompt quiet
sw(config)#end
sw#copy run tftp://192.168.1.1/file.txt

use this commands to customize your script as need

 

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

View solution in original post

2 Replies 2

you can use below methods.

1.

copy running-config ftp://put_user_name_here:put_password_here@put_machie_name_or_ip_here//home/users/some_location/ut-running-config.txt

 2.

sw(config)#file prompt quiet
sw(config)#end
sw#copy run tftp://192.168.1.1/file.txt

use this commands to customize your script as need

 

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

balaji.bandi
Hall of Fame
Hall of Fame

Are you looking to Transfer using FTP or TFTP ?

 

Try Manually is that works before you make Automatc Transfer ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help