Hi,Im fiddeling with various EEM applets and feel a bit held back by the lack of documentation. Or maybe my google-searching skills have declined. First: Is there an official documentation of variables somewhere? So far I have pretty much brute-force...
Forum Posts
I want to configure a daily backup to be copied to an SFTP server using EEM script on cisco router. Please assist on the configuration.
Hello, I'm currently deploying around 60 new Cisco 9200L switches. My goal is to pre-stage and upgrade them to the latest IOSXE release before shipping them out. To do this I'm attempting to use the AutoInstall feature along with a server running a w...
Hello everyone! I am trying to update the following EEM script that will include the vrf, vrf CORP_OFFICE. This script works great with out the VRF but I need to be able to include it because it is causing the backup to fail. event manager applet BAC...
Hello, I'm having a problem where I configured these routes on CE2:ip route 192.168.10.0/24 20.20.20.1 (R2 Gi0/1)ip route 192.168.10.0/24 30.30.30.1 5 (R3 Gi0/2)And the other way around for 192.168.20.0/24 (VLAN 20). (R2 and R3 are using HSRP, where ...
Hi Community, I’m currently working on automating the configuration of WiFi SSIDs for a batch of Cisco 1121 devices using the Zero-Touch Provisioning (ZTP) process. I’ve been experimenting with Cisco's Embedded Event Manager (EEM) but ran into an iss...
Resolved! EEM delete a file from flash
Hello ,I am new with EEM , I want to delete a file from flash with EEM , how can I do that ?event manager applet test authorization bypassEvent timer watchdog time 30 maxrun 120 action 1.0 cli command "enable" action 2.0 cli command "delete flash:te...
I have successfully create EEM script to backup configuration to the TFTP but for the file name i hardcode like this commandaction 1.4 cli command "C9500-CR1"Can we change the C9500-CR1 to getting value from the hostname automatically, so incase the...
Resolved! show run command with date
Hello Community,Is there a command in the IOS that will pick up todays date?For example, show loggin | inc <todays_date>CheersCarlton
Hello,Anyone know which ios minimum version to create EEM script?I can see in this article Cisco IOS Embedded Event Manager Command Reference - E through event manager Commands [Support] - Cisco the minimum version is 12.2I have C2960X running versio...
Hi,I'm relatively new to the IP SLA procedure and very new to EEM. I'm searching for the most efficient way to monitor the availability (packet loss and latency) of a BGP neighbor from a router to actively shutdown the neighbor relationship in order ...
I have this configuration: event manager applet clear_nat_1event track 1 state any maxrun 40action 1.0 wait 35action 2.0 cli command "enable"action 3.0 cli command "clear ip nat trans *"action 4.0 syslog msg "WAN Failover, cleared NAT" I have the max...
Resolved! Cisco Nexus EEM Trigger
Hello,I successful create EEM script to backup the startup config to SCP server daily. When i want to implement to Cisco Nexus i can see there is no event timer or event none for triggering the EEM.Anyone know how we can schedule the EEM on Nexus?
Resolved! Backup Startup Config EMM
Hello,How we can make EEM Script to backup startup config to the SCP server with 2 condition :Backup when we issue write memory commandBackup weekly every sunday @10PM
Resolved! EEM doesn't work NXOS
Hello everyone, I have the following config and it doesn't seem to work on NXOS, but it works perfectly fine on regular ios.feature sla senderfeature sla responderip sla responderip sla 1000ip sla schedule 1000 life forever start-time nowip sla react...
