Network Management

LMS 4.0 showing IP Addresses instead of Device Names

Hi Guys,My installation is LMS 4.0 on Windows 2003 Standard Edition R2.The problem is CiscoWorks shows IP addreses in Reports, Summary tables and basically everywhere for the Device Name Column. Shouldn't this be the actual device host name.I have ev...

Cisco Work (LMS 2.6) Device Configuration

Hi,Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.Thanks & Regds,Lalit

WRVS4400N internet access policy problem with IE

I created an internet access policy restricting access to certain websites. I tested them on Firefox and they blocked the sites. I tried it on IE and they were not blocked. Any ideas.

Limit the number of users on a WLC.

Hi!!Is it possible to limit the number of clients on a Cisco Wireless Lan Controller?If so, where?Regard's,Miguel

snmpv3 testing on a 3560-24TS

Hi All,I am currently trying to setup a network for a customer where I want to use snmp v3, Due to limiting factors within the monitoring software I want to use I cannot use encryption. That aside my goals are to setup two users, one with RO and one ...

LMS 3.2: bug display in job browser

Hello,i'll try to explain my issue, i've got 2 jobs that run every day a 22h. When we look into the jrm.log the jobs end at 23h, they are sucessfull (or failed but no matter) executed in one hour.But in my jobs browser, these jobs are mark in "missed...

2970 Upgrade Question

Had a quick question about upgrading a 2970-24TS-E switch. When I went to download the image it gave me a choice of:Software on Chassis orgigabit ethernet switch module (CGESM) for HP.From the release notes I'm guessing that I should use the Software...

Simulating WAN BW utilization

Hi All, We are trying to procure a Netflow Analyzer tool for traffic monitoring for one of our clients. We need this primarily to check the BW utilization from all the spoke sites, since we are adding a new server/application at the core location.We ...

LMS 4 - Restore from backup on new machine

I have LMS 4 that is up and running on a VMWare windows machine. I have to move the existing install over to a different machine and was wondering if anyone has been successful, and how good is restoring from LMS backup?Would it be better to just red...

Inventory collection failed

HiInventory collection is failed in RME 4.2 in LMS 3.1. Please find the IC_ server log for the device 10.32.0.11.Please help me.

RME User Defined Group

Hello,i create a group under RME > User Defined Group. (named TEST)i choosed system.domainname under Rule Expression tab.(net.xxx.com)and i want when i add a device that has domain name net.xxx.com, it comes in under my TEST group automatically.p.s :...

Where to put new image files

Hi,after looking at the show flash I see that images that came from the factory are stored in drwx. The images I have installed are always preceded by -rwx.From what I understand the drwx is a directory. Is there any benefit from storing them this wa...

DFM 3.1.3 and dublicat IP addresses

Hi,We are getting a lot of dublicate IP alarms in DFMThis addresses are NAT addresses and not a real problemIs it possible to disable a whole ip range from monitoring in DFM?

Resolved! CiscoWorks LMS 3.2 Temperature OutOfRange errors

Hey gang!I've got a new install of CiscoWorks LMS and am getting temperature errors on my 6500 VSS. It looks like the outlet sensor is just hitting the 45C threshold.My question is are theses default settings accurate or do I need to adjust them? T...

Resolved! LMS and kaspersky antivirus

Hi All,I want to install Kaspersky antivirus on LMS server 3.0 .Thanks in advance,Ayman Yehia

Network Management

Forum Posts

LMS 4.0 showing IP Addresses instead of Device Names

Cisco Work (LMS 2.6) Device Configuration

WRVS4400N internet access policy problem with IE

Limit the number of users on a WLC.

snmpv3 testing on a 3560-24TS

LMS 3.2: bug display in job browser

2970 Upgrade Question

Simulating WAN BW utilization

LMS 4 - Restore from backup on new machine

Inventory collection failed

RME User Defined Group

Where to put new image files

DFM 3.1.3 and dublicat IP addresses

Resolved! CiscoWorks LMS 3.2 Temperature OutOfRange errors

Resolved! LMS and kaspersky antivirus

Get ready! Great things are coming to Cisco Community

Have your wish for humanity broadcast into space by George Takei!

Looking for a dev resource

[IOS-XRv ASR9000v] How to send correct SNMPv3 Informs (AuthPriv mode)?

ASR 9000 Chassis View

New Site

Show traffic in a GRE Tunnel

C9300 stack OS upgrade: if doesn't boot, what is fix procedure?

Cisco Business Dashboard certificate prevents starting the service.

Configuring Catalyst 9120AXI-D

ASR9000 XR7.5.2 model-driven telemetry blocks "intf_mgbl" process

Cisco AP DHCP Option 43 with Infoblox