Hi All,What does CASUSER stands for and what exactly it does?regds,aman
Hi All,What does CASUSER stands for and what exactly it does?regds,aman
I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.I have a centralized server which I use to access a m...
a customer observes SNMP timeout problems on a Cat6500 with IOS 12.2(33)SXI. As a result every 2 days (more or less) all interfaces are marked DOWN and a couple of minutes later all interface are up again - but in fact there is no interruption, it is...
Hi,With lms 3.2 during installation we can choose what to install i.e. not install DFM or IPM.How can we do this in the new release 4.0 of the LMS bundle. I saw no options for it during installation of the new server.Just to disable some services, if...
I recently did a new install of LMS 4.0 in a VM - running Win2008 R2 on ESXi 4.1 (used the R2 patch from CCO to do install). Server has dual quad-core processors, 16GB RAM dedicated to the VM - well over on all the min requirements. I have the follo...
I'm working in LMS to setup a compliance for all my network devices and I have specific requirement. In my network I have run port security and another security feature that if the port doesn't used it should be assign to unused vlan. So I want to co...
Hi ,I need to change my mac address / clone another on my network for my internet to work and have been googling but no answers ?Any idea`s anyone ?thank you ..
We have just replaced a 4507R for a 4507R-E but I can't cant RME to manage it. I also can't get CiscoView to work.We appear to have packages installed (see attachments).Any ideas? Is there anything I can do to troubleshoot?
Hi,At present we are using the Ciscoworks LMS bunde 3.0. I would like to upgrade to LMS 3.1.My Question: Is it possible to upgrade to LMS 3.1 with using the existing LMS 3.0 license./San
Hello, I have set up snmp on one of my routers. One of the lines I have entered is snmp-server enable traps snmp authentication linkdown linkup coldstart warmstartThe problem is that the router has 4 fastethernet switch ports and I see linkup...
Hi See the following in the CSDiscovery loglog4j:WARN No appenders could be found for logger (com.cisco.nm.csdiscovery.CSDiscoveryManager).log4j:WARN Please initialize the log4j system properly.Is this a problem as I am trying to get to the bott...
Could you help me.There is support of devices not manufactured by cisco?For example satellite modems.thanks
Hello,I have a situation, where I dont need email and where is no SMTP server in this network, but I need CCO-access for EoX/PSIRT from LMS. Because both settings are in the same menu and LMS4.0.1 does real TCP:25 checking for given SMTP-server befor...
I have CNA 5.5 and have upgraded our 4506 with sup. v4 to cat4500-entservicesk9-mz.150-2.SG.bin (latest version). CNA shows the 4506 as an usupported device. Any ideas. Have set http etc.
Hi, I don't know where I can post my this queation.Only because we want to updeate A/C system in server room, we need to know what Cisco 2800's the power usage and heat output are. It is on the racks and can't see its spescthanks,george
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-05-2025 06:37 AM | ||
01-23-2025 12:17 AM | ||
01-20-2025 02:42 AM | ||
01-13-2025 04:14 AM | ||
01-13-2025 03:56 AM |
User | Count |
---|---|
5 | |
2 | |
2 | |
2 | |
1 |