Hi.I need help. How to implementation EEM.I want use EEM this situation.If the syslogmessage "Interface.., changed state to down" comes than the Router should Reload.IOS 12.4(15)T8/T12Sry for my bad english
Hi.I need help. How to implementation EEM.I want use EEM this situation.If the syslogmessage "Interface.., changed state to down" comes than the Router should Reload.IOS 12.4(15)T8/T12Sry for my bad english
I'm runnig CW LMS 3.2 on Solaris 10. If I go to Resource Management Essentials, click on NetConfig, and then select "create" as in "create a NetConfig job", it takes me to the Netconfig Jobs screen. On this screen, I check "select all devices ", but...
Hi,I need to discover some new devices which are configured with several loopback interfaces. The problem is that the loopback interface used for Administration is not the one with the highest IP address (as I understood that it is the process follow...
Hello,is it possible to make a compliance check against the config-register value in LMS4? I tried to check+ config-register 0x2102but i got a non-compliant device.
Hello everybody,I configured erspan on the remote and the local router and it works fine. For sniffing the packets I have to connect the packet sniffer (e.g. wireshark on a laptop) to an interface on the local router (i.e. the destination of the ersp...
I need to reset the admin password for Cisco Works. I've followed the online documentation and the different methods posted do not seem to work.The first method I saw was to edit the cwpass file located at C:\Program Files\CSCOpx\lib\classpath\com\ci...
Hello all,I have this issue that I am trying to solve, but I am stuck. I want to configure event manager to take a specific action, when an interface from which a route is learnt changes.Let's say for example, that in normal operation route 10.1.1.0 ...
There are no devices listed under All Devices when I try to create a job. However the devices are listed under there correct device type group. Pleasee attached image.Someone please help me
I have set up my branch and core routers to report Netflow data to our Orion server. They both send data, but the core router appears to report on all the data, while the branch router does not. Doing a "sh ip cache gi01 flow" at the core shows all...
Hi @all,does anyone know how to check all devices if they are ssh capable?I already made a "Custom Report Template" in RME Inventory, with query "Image:Feature:contains:SSH" OR "Image:System Image File:contains:k9"and that's OK for normal IOS Version...
Running LMS 3.2 with updates on a Win 2k3 server.When I go to CM>Home>Start Data Collection I get the "Please Wait.... ANI Server is still initializing" error.So far, I've tried re-initializing the database and waiting 30 minutes.I tried stop and res...
Hello.We moved the NAM-2 to a different slot in the same switch, from slot 13 to slot 2.Previously, we removed a CSM-S from slot 2.sw-core12#sh mod 2 Mod Ports Card Type Model Serial No.--- --...
I continually recieve the message "ENVMON-3-FAN_FAILED" in both my buffer and syslog.How do I filter it out?I have version c2800nm 12.4.15.Regards,
Hi,Running LMS 3.2 on Windows server. Also installed RSA security application on same windows server where LMS ia already installed.But LMS is not responding properly,when ever we tried to access Archive configuration in RME,it will come out with err...
Hello,we've an LMS 3.1 running and about one or two weeks we have some problems with the datacollection.If the datacollection is started in cm the status change to running and after the datacollection the status change back to idle. In my topology vi...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-14-2025 07:57 AM | ||
02-05-2025 06:37 AM | ||
01-23-2025 12:17 AM | ||
01-20-2025 02:42 AM | ||
01-13-2025 04:14 AM |
User | Count |
---|---|
5 | |
2 | |
1 | |
1 | |
1 |