Is it possible to create a report on the top ICMP talkers and export it via email? I know I can pick ICMP and select specific IPs, but when I use 255.255.255.255 I receive no data. Please advise, thanks.
Hi dear people:We want to integrate (full integration: authentication & authorization) LMS (ver 3.1) with a redundant ACS (ver 4.2).Is there any procedure o white paper to do it? (I am aware of this wp: http://www.cisco.com/en/US/prod/collateral/netm...
How can i capture top 25 process utilising maximum router CPU and send mail using an EEM program?it tried this event manager applet CPUevent noneaction 101 cli command "enable"action 102 cli command "terminal length 12"action 103 cli command "show p...
Does anyone know if there is an easy way to make a device group by software? specifically i am looking to make one group for Catos devices and another with IOS devices when using the compliance templates our numbers look terrible due to diff...
Hi,I have newly installed LMS 3.2.But device status in DFM shows "learning" state and 10% completed.Here attaching the screen shotDFM 3.2.0common services 3.3.0RME 4.3.0LMS is running on Windows platform.I am not using any .Net2.0 SP 1 update.Resta...
Hi.I have problem with Archive management jobs. When i started a archive jobb, and i look in job details the device is being as Pending Devices. After 12-14 hours the job is terminated. I dont see anything wrong in logs. The device credential is ok. ...
I am using 4 event detectors as triggers for a single applet using boolean "or" logic to coorelate on any 1 of the detectors. They are:event tag 1.0 is a timerevent tag 2.0 is a syslog patternevent tag 3.0 is a cli patternevent tag 4.0 is a cli patt...
Dear all,I have just (yesterday) installed LMS 4.0 with an evaluation licence. It more easy to configure so I have quickly added some switchs and routers (24 devices with a backup) but i have a few problems :- In some menus (sorry I can't remenber ) ...
Hi,Customer has LMS 3.1 on windows which has many group created on CS.He has upgraded to LMS 3.2 but we have some issue with package installation (device not supported even if lms has the package, a SR is opened at TAC).I would like to know if it's p...
HiAftetr upgrade RME from 4.3.0 to 4.3.1 some posibilities in Device Center has disappeared . I have got only Create Collector in Managment Tasks tab. I can't see when has inventory and archive config been polling.Screen is in attachment.
Hi I have an LMS installed on an internal network. The network is not allowed to connect to internet.Updating devicepackages etc. is rather cumbersome, manually downloading from cisco.com.So I would like to know if anyone have an easy way around this...
