Network Management

MSP report not report PS failure

I have this MSP report scheduled to run every morning at 6, today a power supply in 4510 failed but msp report didn't show a failure. I go in RME an drun the report for this device and it still shows two good power supplies, however one power supply...

Resolved! EEM event manager applet problem

I'm trying to create an EEM applet to log the output of a command to file every 5 minutes. The idea is to get a traffic baseline for implementing control plane policing but I want statistics from at least a whole week (not just while I'm at work). I ...

Traceroute with EEM to multiple addresses

I am looking for a way to traceroute to a number of ip addresses(about 50) all at the same time. For example, every 2 hours I want to do a traceroute from a router to remote locations to confirm traffic is routing across the correct WAN circuit. ...

Resolved! RME 4.1.1 devices that fail collection

Hello group,Just installed Ciscoworks and I have a bunch of devices that are failing to collect inventory and some that constantly fail the config archive process. I believe I have all the appropriate updates installed through Common Services. For th...

LMS 3.1 on Solaris 10 - GSS archive sync problem

Hi All,I have 4 GSS devices configured within my LMS 3.1 server. The devices where entered manually and their inventories were successfully collected. The problem happens when I try to Archive Sync them.I create an RME Archive Sync job checking only ...

Resolved! LMS 3.2 on Solaris 10 - No management tools on Device Center

Hi All,I upgraded my RME from 4.3.0 to 4.3.1. After the upgrade I noticed that I can no longer see the management tools on Device Center. Any idea why that is happening?ThanksJose Ribeiro

Resolved! LMS 3.2 gives Application error during Campur User tracking

Hi All,As per the subject during Campus User Tracking following error comes.Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!..Please let me know if anybody has solution for this.Thanks in advance.Samir

Internetwork Performance Monitor Broadcast Traffic

About a month ago we migrated out CiscoWorks server to VMware. Ever since we have had a significant amount of broadcast traffic coming from the server. We have noticed this as it is stopped by our firewall. This traffic is broadcast on UDP port 44342...

Flexible NetFlow through Cryptomap Tunnel

Hi Guys,Came to know that FNF will solve the issue of exporting NetFlow packets through Cryptomap Tunnel.http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6601/ps6965/prod_white_paper0900aecd804be1cc.htmlConfiugred my router to expo...

EEM on 3550 Switch

It looks like the 12.2(52) release is able to run EEM. This only seems to be currently available for the WS-3550-24-DC-SMI model but I have that image loaded on a WS-3550-PWR-EMI:Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2...

Resolved! EEM OSPF syslog

hi all,I'm using EEM to be warn by mail when my OSPF adj changes ; I use OSPF in tunel int, so I can know when tunnel is down/up.My script works well but sometimes I do not receive any mail whereas adj changes, so I can receive mail with "up" whereas...

Resolved! SNMP Traps

Hi,I'm looking to setup snmp traps on a 3845 with the following:LOGIN - Success, failure etcVLAN - Changes etcUPLINK - Up/DownEIGRP - State Changes/Up/Down/Neighbours etc etcBGP - State Changes/Up/Down/Neighbours etc etcNeed to setup the following on...

How to archive a WLC configuration on LMS2.6

I have an old LMS 2.6 with RME 4.0.6 and all the last device packages.I tried to archive the configurations of 4 x WLC4402 present on the Network Topology map (campus map).But the LMS always displays the same error and cannot retrieve the configurat...

LMS 3.2: DCR Server Down

Hi,I have LMS 3.2 installed on a Multi-CPU server (DXDiag is attached), but currently only 1 CPU is active.I have few issues with LMS:1. If i click on Process it takes too much time to show up.2. From CLI if i do "pdshow" it also takes a long time (m...