Hi alldoes any1 has a documents that shows all the SYSLOG messages that could be sent from a router, and have the messages classified by severity levelsi found one for PIX/ASA(attached), but could not find any for IOS routers.Best regards
Hi alldoes any1 has a documents that shows all the SYSLOG messages that could be sent from a router, and have the messages classified by severity levelsi found one for PIX/ASA(attached), but could not find any for IOS routers.Best regards
Hi, Cannot connect to ANI server: ANI Server 5.0-ciscoworks . Verify that ANIServer5.0-ciscoworks is running and restart Campus Manager. Im getting this error while im trying to open Topology Services.Im running LMS 2.6 and my CM is 4.0.1. Do i need ...
How does one know what messages will be sent via syslog vs as a trap? Is there some master logging document that says messages a,b,c are syslog, messages x,y,z are traps and e,d are sent as both?Also, I am trying to tune the level of messaging we re...
I have a topology as follows.I have one central router and many branches connecting to it through ethernet ,serial media.I am looking for a way to report the link changes during a period and the list of events when a particular branch went down.and t...
I got a problem when installing the CM sybase bundled on Redhat Linux Enterprise 5. I couldn't install the Sybase database:,the error is "test dist file integrity ... Error checksum error on distribution file - aborting - exitting". Pls give me advis...
When opening Visualization/Topology services in LMS I keep getting a readme.txt that tells me to install java 1.5_13. Since I don't have _13 I've installed 6. I get the same error. How do I correct without installing _13?
In Reports > Report Generator, I'm trying to schedule a 24hour change audit report.This report runs just fine if I run it immediately, however if I schedule it, it bombs out. Viewing the log file with Debug enabled for ChangeAudit, it looks like RME ...
hello,we have a 6509e with a FWSM module installed. On the FWSM I have added the below lines in the config:tftp-server inside tftp.host.com /fw.configwhich allows me to back up the config to our tftp server by simply typing:wr netIs there a way to d...
We're wanting to integrate the job approval emails with Remedy, however, Remedy is very restrictive on the formatting. Is there a way (hack?) to modify how the emails are formatted via a config file or some other means?Just thought I'd ask.TIA
Does a router 2800 would responde to a SNMP GET/SET?
I would like to know if the routers 2800/3800 are configured by dafault to respond SNMP pings, if there is someonce that knows about it please help me with this question.
Hello, Is it possible to stop the deamon smtp check to send hellos to the smtp gateway?Cheers Blaise
RME goes to a lot of trouble to archive VLAN.DAT files from IOS switches, over time creating many thousands of files on the server. I have often wondered why. Is there any use for an archived VLAN.DAT file?
Hi I am having an issue with a device in Device Management. I have added manually and I made sure the SNMP commmunity matches but I still see it with a ?.I have done an snmo walk and I get the followingThe following is a SNMP walk of device 10.9.40.5...
How can I add the SSH option to the tools in Device Center?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-05-2025 06:37 AM | ||
01-23-2025 12:17 AM | ||
01-20-2025 02:42 AM | ||
01-13-2025 04:14 AM | ||
01-13-2025 03:56 AM |
User | Count |
---|---|
4 | |
2 | |
2 | |
2 | |
1 |