Network Management

Hello,I would like to managed ASA5520, ASA5540 and PIX515-E with my ciscoworks LMS 3.0.1, but the device type are unknow in DCR Device management.In attach you can see the output word file with the version install.I will just save the configuration i...

Hi,1. Is it possible and how is it possible to monitor VRF light (by means without MPLS) seperated traffic with NAM?2. How can we connect the NAM via Cat6500 (Sup720) to iSCSI connected storage? There is no FC connector at the NAM.3. Which Netflow Ty...

I am using Praessler PRTG MIB importer to get the OIDs for a Cisco 2960. However, when I use Praessler's PRTG Traffic Grapher and any of the OIDs, I get a "no such name" response.I obtained the .my files from Cisco's ftp site: /pub/mibs/v1. I am curi...

We have one of our switches setup like this but we are not getting any traps from it. Is there something wrong?set snmp enableset snmp trap enable macnotificationset snmp trap 10.1.1.100 all port 162 owner CLI index 1set port security 1/1-2 disable a...

Hi,I have some stupid questions about syslog purge, somehow I could not find this info in the User Guide. We have CWLMS 3.0.1 installed, and default Syslog Purge Job scheduled every 1 am. My questions:1. How do I see the size of syslog database? My...

After successfully integration of My Cisco Works LMS3.0 with ACS, I see the message "JRM Server is down or inaccessible by user" on Campus Manager and Common Services as well. Campus Manager discovers devices but when I start it for Data collection b...

Hi,Customer has an issue with vlan config archive for several devices.I ask him to take a sniffer trace between the LMS server and a device.We can see that LMS can telnet correctly to device, but when lms give the tftp server IP address, he fails he ...

HELLO ALL,we are presently using cisco works LMS 3.1 in our network .we have remote sites connected to our head office.If I want to download image form the remote site .it is giving error SWIM1124: Failed to copy the image from Flash due to the reaso...

Hi,We are running LMS 3.0.Can it possible to see the Bandwidth Utilization,Trunk utilization,WAN link Utilization and port traffic using LMS ?If not please suggest other tool which can be fullfil above requirement.Thanks & Regards,

HELLO ALL,we are presently using cisco works LMS 3.1 in our network .we have remote sites connected to our head office.if any site goes down ciscoworks is not immediately sending mail .we get mail06-Jul-2008 09:01:15 Infos: Period: 8:00 to 9:00 Devic...