Network Management

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 
Labels

Forum Posts

Resolved! upgrading ASDM

Currently we are at asa version 7.0(6) and 5.0 for the asdmCisco Adaptive Security Appliance Software Version 7.0(6) Device Manager Version 5.0(6)We would like to be at ASDM version 6.0. How do I go about upgrading. I read that we need to be atleas...

Hi!We've installed the QPM 4.0 and common services 3.0.5.we would like to set DCR master/slave between our LMS DCR ( CS 3.0.6 ) and QPM because we have more than 1400 devices and it may be online connection between them.but cisco draw attention to us...

Hi Guys,I tried to perfrom Vlan port assignments within Campus manager but received the following errors:"one or more devices in the selected list doesn't support VPA operations"Is this MIB issue or device IOS incompability.This device is a 3560-48PS...

chronix by Level 1
  • 1227 Views
  • 1 replies
  • 0 Helpful votes

I have a couple of failed devices in LMS 3.0 RME that are stating archive configuration failed. Error "TELNET: Failed to establish TELNET connection to 192.168.100.226 - Cause: Authentication failed on device 3 times. Could not detect protocols runni...

dionjiles by Level 1
  • 785 Views
  • 3 replies
  • 0 Helpful votes

We start to use radius when login to LMS2.6. Now problem is how can i tell alternate radius server in CS-aaa mode setup-radius-login module options or is it possible at all.any idea Juha

u346874_2 by Level 1
  • 733 Views
  • 2 replies
  • 0 Helpful votes