Hey Guys I'm having a little problem i can't seem to fix.I've updated our Cisco 2960x switches to version c2960x-universalk9-mz.152-7.E5.bin from c2960x-universalk9-mz.152-2.E7On our stacked switches, TFTP and SSH isn't working anymore, but it works ...
Hi all, i am running http protocol in cisco 2960 & 3850 switch..'Now i want to make it more secure and want to configure https instead.. Make sure that HTTP authentication is transmitted over HTTPS please guide if any suggestion is there..
My team runs a multi-site network, all Cisco, not a ton of devices, but not too little that Image, IPAM, monitoring, Config Management, etc couldn't benefit from some modern management techniques. We've started down the idea of IaC with Gitlab/Ansibl...
I am not a Network admin, but recently I was forced to manage couple of Cisco Catalyst 3850-48T-E Switches and Cisco ASA 5515 firewalls. This network is working fine from past 6 years without any issues, but from past 1 week we are noticing network b...
When you call an action cli in EEM , the output generated from the last cli command is stored in the variable $_cli_result, the issue is this is overwritten each time action cli is written.
So if I have two cli commands I want the output for ( i've...
Our network team has been asked to evaluate a simple NPM solution and would like to try two different ones, WhatsUp Gold and SolarWinds. Question: Can you configure both at the same time on your network to the same devices? I've attempted this, bu...
Dear TeamI have a Cisco 3850 Switch in one of our offices, the network ports are running out at that site and I need to add another 3580 switch to expand the network, Could you please let me know how to do this.Do both switches need to have same IOS ...
Hello Everyone, I am kind of new to Meraki dashboard. I noticed a down tine of less than a minute on all my Meraki Access switches connected to my dashboard earlier hour of today around 1am. I checked the MX95 to see if theres any upgrade that could ...
What do network engineers do? What? Cisco certification includes CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, CCVP, CCIE and other certifications of different levels, different contents and different directions. CCNA, CCNP and CCIE are the three certification...
Hi,What are the feature of SNMP Read Only community string.Is it possible to read the router configuration if you have read only community string.RegardsM
Hi, I want to add our Cisco ASA into the monitoring tools but it needs MIB files in order to translate the OID. I have tried to search in this community but the link that I got is broken. Could someone point me to the newest link? I am talking about ...
