Network Management

Can anybody advise?I am running Campus Manager 4.0.5, when I run end host reports the last seen entry shows every last seen date and time for each MAC address on a switch port. I have deleted the last 30 day old records but still this problem remains...

I tried to run the following command to uninstall 3.0.4 so I can install Ciscoview 6.1.2. Does anyone have a solution to this message?#/opt/CSCOpx/bin/perl sp_rollback.pl---------------------------------------------------------------Starting Ciscowor...

I have noticed that we have many devices appearing in the error report under device credential verification. Devices appear as failed for SSH and SNMPv3. We do not use either at the moment and when I run the check credentials I do not have those op...

Hi,Does anyone know how to discover if a particular featureset for a router has been configured and activated?I have been able to locate a list of available features for a given router, from the OID .1.3.6.1.4.1.9.9.25.1.1.1.2 (image string CW_FEATUR...

How do I clear out these entries from RME failed synch archive? see attached pic.Also, is it possible to archive a 1900 series switch? I cannot get a successful archive on these older devices. Telnet failed authentication 3 times.

Hi all!We have bough CSACSE-1112-K9. This is software (CS ACS) and hardware platform.I'am rename AAA self-server on CS ACS. There was aaa server with name "Self", key "secret_value" and own ip address. I'am delete this server and add it again with na...

HI,We have bought LMS 2.5.1 as upgrade copy to LMS 2.0Now while doing license validation for DFM 2.0.3 it is failing with the DFM 1.1 CD. Whether we need DFM 1.2 CD for this and where to get.ThanksRaj

How to restore cisco ios using ciscoworks, when the ios on the device corrupt/missing/damage??

ok nice i m working with MRTG(cisco 2851) . it monitors bandwidth nicly, but i could not monitor ISDN inteface as se1/0:15 , does mrtg not work with sub interface ?

Hello,We are looking at purchasing MARS in the near future, but presently have no software running any kind of sntp protocol.My questions is this: Can I run Kiwi syslog software on a Cisco router...(i.e. 4500, 2500 series devices) like I do no my fi...

I have a Syslog server configured in my network.The Cisco 6509 switch has been configured to send SNMP traps to the syslog server by using the command: snmp-server host 10.40.70.1 public Do i need to put in the following command as well : logging 10....

my god ISDN bill is going up . is thr any tool to log/monitor call of ISDN on cisco 2851 router ? , i check router with all isdn related command nothing get. please suggest any 3rd party tool to access ISDN logging