Network Management

Hi. We're upgrading our remote site routers from 2600/3600s to 3845s. In Network Topology I'm selecting LAN i/f ip address(as opposed to the WAN i/f ip address) for management, after the installation of the new router. But as soon as I select, the ro...

Hello, On a customer router their receiving input errors which are all ignored errors, ISP advised they are not seeing any issues on thier end. Will increasing the buffer size or input que size solve this problem?Interface stats:Ethernet1/0 is up, li...

Can anyone point me in the right direction so that I can try to figure out what this message means?28-Apr 12:11:23 Trap Utah:Arches.efs.sw 1.3.6.1.2.1.17 (2){<no variables>}I know what the majority of this Trap is but I trying to find out what this ...

Hi,I have been searching for the ciscoview device package for our ASA5520. could anyone help or is it currently not available on the cisco website? Many thanks

We use IPM 2.6.0.0 client and when anyone views 'real time statistics' for any given collector, we lose all historical stats for that time period when we view 'historical statistics' for the same collector. If I run a historical report for the same ...

Hi,I've just migrated my Data Center in Sup720 12.2.18 and i've discovered with snmpwalk some interfaces referenced as unrouted interface. In fact, that's all my vlan's configured on the switch. Does this value represent the total traffic switched l...

Hi,We try to use SNMP protocol to get the device type information for cisco 877 and 3560 device. But it looks like cisco missing snmp product mibs (they should be in Cisco's product mib list, but they are not).They are: .1.3.6.1.4.1.9.1.569 8...

Was having problem starting device discovery in Campus Manager. After looking at a couple of different things, noticed that DeviceDiscovery is in TRANSIENT TERMINATED ProcessState. Has anyone ran into this before? I have updated software to lates...

It says this isnt supported but has anyone had any success with doing this setup?

Has anyone got UGCA to work?Even after I've ran the repairsyslog.nawk command it still doesn't process any Call records.I just can't load any into the db.#./loadcdr_file.sh /tmp/sys.new sys.rstJob started successfully, please check job information fo...

I have yet to find a straight answer... does CISCO works support SSH v2.Our devices have telnet disabled. The devices with SSH v1 are getting backed up OK, but i have 5 devices with SSH v2 that are failing, these 5 devices have IOS based images.My se...

When I run the show ip sockets from the CLI on a Cat 3500XL switch, I get some unexpected results. On 3 switches that are interconnected, there is a client device (10.2.73.45) that shows a connection to port 33521. These entries show up everyday when...

Can Ciscoworks LMS 2.5 generate a report showing the time and date users telnet into a Cisco devices on the network. In the same vein, can LMS generate a report that shows backup dial-in modem logins?Thanks, JF

CiscoWorks 2.5 is installed and the passwords are automatically remembered. How do I turn this function off, or do I need to reinstall?