Hello All,A plan is required to build an internal network that serves 100 users in the company and is capable of future development to accommodate from 300 to 500 usersThe company is divided into five departments located in the same neighborhood. All...
Forum Posts
We have a Cisco PIX 506E VPN/firewall for our network (e.g. 50.197.160.20 is public IP of the Cisco PIX). I have a database engine running on a PC in my private network behind the Cisco PIX 506E. I want to allow an external application on the interne...
Hi folks, Our C3850 is not properly detected in Cisco Business Dashboard.The dashboard has the credentials, there is a SNMP V2C RO string in place know by the dashboard, cdp is enabled, lldp is enabled. Do you know how I could get it properly recogni...
I am using SNMP to read switch information from a Cisco 9300L Catalyst Switch and I am trying to figure out a direct reference tag/address that I can use to show the status of the two power supplies (redundant) as either On or Off. Currently I am abl...
Hi all,After spending so many hours I am quite frustrated and asking this question.. Setup: - GNS3GNS3 VM Cloud -> ASA firewall -> Ubuntu VNC clinetCloud 192.168.114.2ASA Outside 192.168.114.10ASA DMZ - 172.16.1.1DMZ (Ubuntu) - 172.16.1.2ACL - outsid...
Hi Firstly Thanks in Advanced. Does FPR-1010 support HA with pair of interface from each firewall ?It helps to avoid split brain when a failover interface / cable got break or damanged.
Hello Everyone, Apologize if this is simple question but I've tried google but still not really understood. I would like to understand this if anyone here can enlighten me. I've managed to send routers log messages to our dedicated Syslog Server. I g...
Hi all, I am no expert in network, I am learning. I have this project here where I am using a cisco SF350-24p. And I have a device that interfere with another (outside the network) where to turn off the device on a specific port at a specific moment...
I have been exploring the netconf/restconf apis along with the myriad of different yang models. From a configuration management perspective, it seems like a great solution to be better automate common configuration tasks (vlan changes, speed and Poe ...
Hello, I believe I am posting this in the right discussion board. If not, please direct me where this inquiry would be more suitable. There are a series of packets tracers on Cisco's Networking Academy for candidates to complete, but where can those ...
Resolved! subnetting
my network will be the carrier media for several services. data, CCTV, access control, access points, IPTV and IP telephony ...etc.i have cisco 9407r as a core switch and 9200 and 9300 as access switches. i need to assign VLAN and subnet for each ser...
Hello everyone, i want to shut - no shut an int (e.g. g0/0)at night , like at 00.00 using an EEM script . The script will be used on a IOS XE based device . Can you suggest a script or a reference to do that ? Thanks in advance Regards
When we try to ping multicast group IP 239.1.2.3, we're getting reply from the receiver within the site. But, when the receiver is on a different site, only first ping is working. From the next packet, it's not working. What is the reason for this?
I'm trying to resurrect a couple of Cisco Catalyst 2975 switches and after resetting defaults/ 10.0.0.1 / log in / web console / 404 error. I read that I may need the Cisco Devise manager installed but I cannot find a download for it; any and all h...
