Network Management

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hi All, I have installed ciscoworks2000 4th edition , i hv 6500,6006 , 4006 and 2950 switches in my network. ii hv installed campus manger version 3.1, but in topology view, not able to view 2950, as 2950 box is coming with ?, is there any patch th...

Greetings!I don't know whether I'm on right forum or not as I'mnewbie to NMS.I want to know which are the parameters in NMS for which real time statistics can be shownMy NMS manages a switch and currently we have collection RT stats for bytes in, out...

ana_joshi by Level 1
  • 2685 Views
  • 1 replies
  • 0 Helpful votes

Hi,I´ve some problems with the NBAR, I´ve configured the Ubr7000 with this commandsclass-map match-any fileshare match protocol fasttrack file-transfer "*" policy-map block class fileshare drop interface Fastethernet0/0 service-policy input block ser...

Hi All,I have a c7206 router with an ATM interface. I provide ADSL connection to customers.Is there any easy way to measure their traffic by login name from our router?So I have to create statistics about in/out bytes (or Mbytes) per customer.The use...

horvaia by Level 1
  • 2751 Views
  • 2 replies
  • 0 Helpful votes

With switch 2950 CatalystQ1. Can we use a single port in different VLAN ?Q2. How can we communicate different network(192.168.20.0, 192.168.30.0 ,192.168.40.0) with router 1750 tell me in commands

Hello,We have a C6509 (OS 8.2(2)) with a newly installed sup2 mod (x6k-sup2-2ge) and one newly installed gig-e mod (x6148-ge-tx). (note: all of our other mods are 10/100 x6348-rj-45).We'd like to determine which ports on the 10/100 blades are being h...

nizan1342 by Level 1
  • 2969 Views
  • 3 replies
  • 0 Helpful votes

HI ALLI have some problems with CiscoWorks SyslogAnalyzer and need help.I have configured syslog on my switches/routers and directing it to the ciscoworks server under solaris. I infact get these syslog messages on the log file generated in /var/log/...

We have a HP nas/san solution that needs dedicated bandwidth. What is the best way to assure that the replication traffic has priority on the link. We have a DS3 connected via 2 3640 routers with a T-1 as backup. My initial thought was to configure a...

jwhite by Level 1
  • 2834 Views
  • 1 replies
  • 0 Helpful votes

I have 10 campuses seperates by Firewalls. I'd like to be able to put 10 seed devices into ANI discovery, but there are only five lines.Workaround;Add the first 5 seed devices to first 5 networks, let discovery run, verify devices are imported and a...

Review Cisco Networking for a $25 gift card