I found today in my 6500 core logs some user ip trying to log in to the core on port 443 even though i already have an access list for the authorized users under the vty lines which obviously didn't offer any protection against 443 attempt. so my que...
Hello, I run a scheduled EEM script on my ASA to backup the running-config which works just fine except for a minor issue. When the file gets backs up, it replaces the former file there because of same name. This works in contrast with what I have r...
Folks,What is UCS in networking? A unified computing system (UCS) is is a converged data center architecture that integrates computing, networking and storage resources to increase efficiency and enable centralized management. UCS products are design...
We have several 2900 series ISR terminating site to site VPNs and often see these messages:
CRYPTO-4-RECVD_PKT_INV_SPI: decaps: rec'd IPSEC packet has invalid spi for destaddr=198.18.99.123, prot=50, spi=0xA6517B6A(2790357866), srcaddr=82.221.105.6,...
dear alli have the isr4331 router i enabled the Application Visibility and see traffic data, i need to find the local ip address corresponding to the traffic getting out from routernetwork mapnim vdsl module -> port g0/0/0 -> switch -> clientshow can...
I have two 6500 cores working in hsrp , i was wondering if i can move all the modules except the supervisor in case one of the cores failed to the second core. the modules location and model are exactly replicated in both cores.
Mod Ports Card Type...
Hi, End to end is one of feature of Qos. Please see this connection: phone ------- (g1/1)switch1(g1/2) -------(g2/1)switch2(Core)The cable between the phone and port g1/1 at switch1 is 1G The cable between g1/2 at switch 1 and g2/1 at switch2 is 10G...
Is there a special format that the GPS information from a Cisco AP is in?
'show gps location' yields:
AP-1#show gps location
GPS Location InformationcollectionTime: 0x0 0x10 0x1D 0x1C 0x0 0x0 0x0positionFlags: 0xC0latitude: 341307927longitude: 3323...
I use "debug crypto ikev2", "debug crypto ipsec", and "debug crypto pki trans" to extract lots of information from the FlexVPN clients landing on my ASR. The information I am required to collect, log and forward includes CN of the cert used for pki, ...
Forum,We are trying to set up the Cisco Business Dashboard HyperV image and are at the initial login screen. I have not been successful in trying to find what the initial login credentials are. Can anyone provide the initial login for this?
Has anyone ever got the following doc example to work? I have changed it from shutdown a port to change the description as otherwise I would lose access to my switch (high quality example there Cisco) but nothing is deployed. I have created an inte...
I'm trying to combine the output from two show cmds using EEM to form a single syslog msg, however when I use 'append' it places them across different lines. This is a problem, as I want them to appear as a single msg on the listening syslog server s...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.jpg "VIP Community Legend"){kind=icon}
