Network Management

Hi guys. I recently bought a 3640 and when configuring i realised i cant make fa3/0 to run over full duplex mode. Only Half-Duplex Option. Already tried full duplex mode in the interface and it doesn´t recognize the comand.n The interface is a 10/100...

Hello,It’s not possible to add a member to a community when creating a new one. It seems that the protocol used to communicate with the devices is HTTP and not HTTPS. With 5.6.3, it works fine.With 5.6.3(on the one which it fails, we don't have acces...

Sorry in advance for the newbie question...I have a single host with many Hyper-V VM hosted internally in network 10.1.1.0/24.The router is ASA5520 running ASDM 7.6(1); ASA 9.1(6)11 My problem now is making the VMs (or at least part of them) access t...

Hi everyone, I'm trying to configure "event notification" by email with my CISCO Prime NMS  4.3.1. The SMTP server requires to configure authentication method (with login and password) in addition to the server IP address. How do we add or update the...

I am working with a client on troubleshooting an issue with a Nexus 9K.   Seeing as I do not have direct access to the device, I had him run 'show tech-support' to get all of the information on the device.  On other devices, this makes a large, but m...

Good Day All, I have configured tacacs+ & aaa configuration on my nexus but it is not working anyonen can advice with expert opinion?? below are configs done: AAA Configurations =============== HQ-N7K-2# sh running-config aaa aaa authentication logi...

Hi all,   I want to reach out with my problem I have a Cisco Prime NCS physical appliance, and I have the HDD problem decribed in the field notice below and I need to know if the described workaround is permanent or I should replace the HDD occasiona...

I'm trying to upgrade a router with CiscoWorks RME using SCP. It fails and says " SCP: [22 -> x.x.x.x:28475] send Privilege denied.".The privilege level for this user is 15. I have checked the firewall and it's not blocking the traffic. Any ideas on ...