Network Management

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

NTP configuration issue on Cisco 9K

Hi, I've configured NTP on Nexus 9k switches running nxos.7.0.3.I4.3.bin and my monitoring application can't pull NTP data from the devices:   CCH-N9K-01(config)# show run | i ntpclock protocol ntp vdc 1ntp server 192.168.1.60 preferntp source-interf...

diggsc by Beginner
  • 1319 Views
  • 0 replies
  • 0 Helpful votes

Prime Infrastructure lists port

Hello, please can you help me? I have a bigger network infastructure and using Prime Infrastructure 3.2. It would help me, when Prime can lists which port has "authentication port-control auto" in configuration in summary for all switches. Is this po...

ZdenekF by Beginner
  • 668 Views
  • 1 replies
  • 0 Helpful votes

Resolved! PI 3.2 process takes all resources

Customer find his PI is extremely slow, in the GUI and in the CLI.   Exact PI version is 3.2.1   Investigation using top, shows a process is taking 160% CPU and 40% memory. Load average is 5.20, 6.20 4.00   On other PI systems this process also takes...

m.hegeraat by Beginner
  • 1282 Views
  • 3 replies
  • 0 Helpful votes

Simple syslog EEM script issue

Hello everyone - I was hoping someone can provide some insight on to what is going on here. I have a simple EEM script to log a syslog message once every monday.  event manager applet SECURITY_SYSLOG event timer cron cron-entry "0 8 * * 1" action 1.0...

Prime 2.1 upgrade to 3.0

Hello, team,   I am asked to upgrage Prime 2.1 to 3.0. Is there direct upgrade from 2.1 to 3.0? Are there any manuals for this?   Could you please point me any difficulties, which I can experience during the upgrade process?   Many thanks in advance,...

Simple EEM Script not working

Hello everyone - I was hoping someone can provide some insight on to what is going on here. I have a simple EEM script to log a syslog message once every monday.  event manager applet SECURITY_SYSLOG event timer cron cron-entry "0 8 * * 1" action 1.0...

HTTPS monitoring using Netflow

Hi All,   I have configure Netflow Version 9. I'm able to monitor HTTP traffic however, I'm not able to see HTTPS traffic. When I run command #Show ip cache flow   I can see https traffic being used by one client as   serial 1/0/0  x.x.x.x    x.x.x.x...

Resolved! Cisco Prime Infrastructure Backup

I'm using Cisco Prime Infrastructure v3.3 to manage our wired infrastructure. I would like to set the backup schedule of my devices configuration and IOS image. Does we can backup that into the external servers such as FTP or TFTP?

PutmanoAIT by Beginner
  • 1625 Views
  • 3 replies
  • 0 Helpful votes