Network Management

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

I  have cisco prime 2.2. I have two wireless controllers 5508 that are managed by prime. In addition,a 100+ APs that registered to the controllers are showing up in prime inventory & are using up my license count. I have a total of 25 device licenses...

chibo3055 by Level 1
  • 2553 Views
  • 5 replies
  • 0 Helpful votes

Resolved! CCIE Validity

Hi  i have CCNP R&S and it will be expire at 12-12-2018  if i passed CCIE 400-101 is this renew the CCNP certificate and what is the duration ? is 3 years or less than ?   thanks

Murad* by Level 1
  • 1284 Views
  • 6 replies
  • 0 Helpful votes

hello all  i have 3 internet connections and i have a 4331 as my router and i have a 3850 as my switch i have connected my internets to my switch and gave them each there own vlan 500,501,502 and connected my switch to my router via a trunk link with...

n.bokhar1 by Level 1
  • 1704 Views
  • 2 replies
  • 0 Helpful votes

Resolved! IF-MIB and IfDescr

Hi, all   I do the snmp trap monitoring for some device,Catalyst 3850 and another network device.I use "IF-MIB" of the standard MIB.   There are various interface types, for example, GigabitEthernet and Loopback,Tunnel. Besides, there are interface n...

Hi,   I have a stack of 3850-switches and want to upgrade the switches in the stack by using Cisco Prime. Is it possible to do the upgrade so that one switch is upgraded first and rebooted, and so that the next switch is upgraded when the first is on...

cisco by Level 1
  • 8030 Views
  • 2 replies
  • 0 Helpful votes

for some reason I cannot remore ssh to my C9400, I tried to ssh directly and it works. I going through  a FW but the firewall is allowing the traffic,  I used the same cable to connect a different Switch  and it works , so I know is not the FW. I fol...

Review Cisco Networking for a $25 gift card