For rogue alarms, I can not find the security Policy . that is if the rogue is running with encryption and what encryption. In the controller GUI this information is available. Is there something i am missing? Thanks
Forum Posts
Resolved! Consejo en el diseño de una red
Buenas noches a todos, Ante todo agredecer lo primero la asistencia de la comunidad. Queria exponer una situacion de diseño de una red, en el cual, tengo mis dudas de si funcionara. Por situacion geografica el ISP de un cliente coloco el adsl ...
Cisco Prime Infrastructure stuck on Booting Cisco ADE-OS Version: 3.1.0.001 after reload the UCS server. We try to load a new ISO to make a fresh install by KVM console without results. Any advice? Cisco Prime 3.1 on UCS server.
Hello, I'm trying to access the web interface for running commands on a Cisco 3550 running c3550-ipservicesk9-mz.122-52.SE (the tar version). I can access the main interface with no problem if I go to the direct IP address in Chrome, but when goi...
Current ios: isr4300-universalk9.03.13.02.S.154-3.S2-ext.SPA.binProjected ios: isr4300-universalk9.03.16.06.S.155-3.S6-ext.SPA.binI was trying to do an upggrade analysis on my routers before distributing the IOs to the routers, the result came out as...
I'm running prime infrastructure 3.2 to manage our Cisco wireless environment. The issue is that prime is not showing any client traffic and AP traffic information/graphs. Kindly assist in fixing this issue. Thanks
Resolved! ISR4321 and Throughput Configuration?
Hello All, Device: ISR4321/K9 License: FL-4320-PERF-K9 We have a bunch of these ISR4321s already in production, and today I was configuring a new ISR and had a question about the throughput configuration. I noticed today while I was configuring t...
what are the requirement to active prime infrastructure license
Resolved! Detecting MAC Address Drop
So what I'm trying to detect is someway of knowing when a MAC address drops in a bridge domain on an ASR 903. Basically, how should i go about knowing when this command only shows one or even no MAC addresses? POPTA1A01#sh bridge-domain 1024Bridge...
How does one configure Prime Infrastructure to forward WIPS alarms to a 3rd party SIEM?
Hi guys, I already installed LMS 4.2 and added the licenses inside it and I decided later to upgrade it into 4.22..and I have the iso file .. Can I install LMS 4.2.2 from cratch and move my licenses to it? Or I have to make upgrade procedure? ...
Resolved! DHCP Lease on 3750
I have multiple ip pools in dhcp. we are having 10 hours lease time in every pool please help me i want to dic lease time in every pool. please help. how to change lease time in already runnig dhcp
Resolved! wlc problem
i have taken a backup of my cisco wlc 2500 series and want to export all the user in one go to cisco wlc 5500 series anyone know how to do it .??
Exactly what happens when registered devices exceed the licensed numbers? Does Prime stop working, or it still works, but just gives you a warning when you login?
Hey All, Successfully upgrade to PI 3.2 over the weekend. Everything appeared to upgrade while. However, now when I try to upload a new IOS image, I get an error message saying to input valid scheduler values even though I wanted it to run Now. If ...
| User | Count |
|---|---|
| 3 | |
| 3 | |
| 1 | |
| 1 | |
| 1 |
