Network Management

Good afternoon everyone.  I have been referred to the Cisco Support Community for assistance by TAC.  I was hoping that you can help me with an EEM script that I am somewhat able to get working.  However, it does not meet my requirements 100%.  Since...

is there a command to load date/time with a online ntp server?

Hello I have a poe device which is just an ir illuminator (no data) and when I log into the switch (2960S) it constantly is producing these messages. %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/19: PD removed%ILPOWER-7-DETECT: Interface Gi1/0/19: P...

Hello all, We are running PI 3.0.0 with the following updates: PI 3.0.2 Update 02 Critical Fixes Version 2.0.0 PI 3.0.3 Critical Fixes Version 3.0.0 PI 3.0.3 Critical Fixes Verson 3.0.0 PI 3.0.3 Update 04 Critical Fixes 4.0.0 I am trying to delete ...

Hi, Firstly, I am not a networking guy and do the basics via the web front end. We have 2 stacked SG500-52's and we need to get a certain MIB object ID working with SNMP. When I use AdventNet's MibBrowser, using SNMP v2, I can retrieve some data. H...

Sometimes I wonder if people actually use the Plug the plug and play feature on prime using APIC-EM as a proxy service for PnP. There is not really "zero touch" when preconfigure the devices.  I have one project installing 3000+ switches. There is a...

Cisco Network Assistant 6.3 (and 6.1 and 6.0) on Mac OS X 10.10.5, Java 8 update 121 (i.e., current): I planned to upgrade the s/w on a router before I installed it, so I pulled up CNA, but the option to Upgrade Software isn't appearing for me.  The ...

Feb 15 19:44:24.602 IST: %ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on GigabitEthernet0/1. Feb 15 19:44:24.602 IST: %PM-4-ERR_DISABLE: loopback error detected on Gi0/1, putting Gi0/1 in err-disable state

Hello I am evaluating PI 3.1 and MSE 8. Just wanted to know about Cisco Prime 3.1 Wireless HeatMap features and I’d appreciate your help clarifying the below issue: Existing Demo Setup: Cisco WLC 2500 Series, running ver 8 and Cisco...

Hello, can someone please give me the link for the Smartnet data collection tool, which auto scans your network and returns information about warranty status etc for each switch/router it finds. Thank you kindly.

I have Cisco Prime Infrastructure, and on the server that I am working on, I have 15 Assurance licenses and I am using 11 of the 15. My WAN consists of mostly 2951 routers that have Security and Data licenses installed and I would like to enable them...

Hello all, I was wondering if it was possible to modify the result of the default interface command.  For instance, when issuing the "default g1/0/1" command, can you change what "default" is to where the interface is configured as below: interface ...

hello ,  I have cisco 1841 installed as remote console connecting device for all. the network devices using the  "HWIC-8A@" all the devices are connected , when I do show host I see the tty host but when I telnet to any of tty it says connection refu...