Is there a way to stop a running event?
I would reload the router in case of connectivity issues, but give you the chance to stop the reload if you're working on it.
fe:
event manager applet Reload-on-vpn-failure event track 33 state down acti...
Hi;
I have 1142N Cisco aironet. I cant access to this device, actually I cant make configuration. i used console cable with Ethernet cable to setup.
steps which I used:
AP>en
AP#configure terminal (I am stuck here)
in this point the system doesn't ...
This question is for people that use Cisco Prime's plug and play to configure switches at remote sites, this is Prime WITHOUT using the APICS-EM. I don't have much issue with pre-provisioning the new switch in prime, the question I have is what port ...
Hi All,
We are having a problem with the WAN performance reports in Cisco Prime 3.1. When we run the report with any criteria we get a message saying that there is no data available, this happens regardless of which devices, data sources and time pe...
Withiin PI 3.1.3 during the Configuration Deployment process, is it possible to specify a different CLI credential for the deployment rather than the one that is associated with the device?
Hi guys,
Got a very weird scenario and would appreciate any help.
Got 2 3750 clusters - site A and site B.
They are connected via 2 lines bundled into portchannel each end.
Since the ISP providing both lines does not support LACP or PaGP those are st...
Hi,
We are using ASA5505 with 1 site to site VPN.
I copy the configuration to our spare firewall ASA5505, internet is working but the site to site VPN is not working.
If I connect back the primary ASA5505, the site to site VPN is working again.
wha...
Hello,
I am having issues with Cisco Prime LMS 4.2.5.
The reports are not working and the link is very slow, is there something i can restart (maybe a service) that does not cause an operational impact.
Hello guys,
We are using Cisco Prime 2.0 for our network infrastructure. I would like to update interface description on several network devices and interfaces. I have an excel report with device/interfaces list to configure. I would like to import ...
Hi All,
I have seen below error on Cisco prime infrastructure 2.2 tool
The device limit must be less than or equal to life cycle license limit and also ISE secondary device is unreachable from Prime.
Could you please suggest how we can fix the issu...
Hi,
I have a NAM installed in a Cisco 6506-E.
NAM application image version: 3.6(1b)Maintenance image version: 2.1(3)NAM Daughter Card Micro code version: 1.34.1.28 (NAM)BIOS Version: 4.0-Rel 6.0.9PID: WS-SVC-NAM-2Memory size: 1024MBDisk size: 40GBIn...
