Network Management

Hi, I have a problem concerning Prime Infrastructure 2.2:After upgrading from version 2.1, the wired clients in the "client count"-dashlet are only shown if you log in as root.Other users can's see them since the upgrade. Thanks in advance.

I have configured Prime 2.2 to backup our 5508 WLC  The backup runs and just ends with Backup Failed  I have seen the bug alert and increased the SNMP timeout for the WLC to 30 seconds with no joy I also run debug transfer tftp enable during the back...

Hey Everyone, I'd like to get Prime to notify me when an EIGRP adjacency goes up or down on our network. I am working on migrating us from LMS 4.2 to PI 3.0, and I do have this working in effectively the same way on LMS. What I've done is create a c...

hi, I have an issue with one of my EEM on IOS 15.3(3)M7 The same EEM works great on 15.1(4)M9 any idea why ? ======================= event manager applet tunnelUP  event syslog pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel.*to up"  a...

Hi, For some reason the syslog server I have setup logging to keeps dropping messages, and showing errors, below is the output, I have checked all the physical interfaces and there is no errors i.e output/input errors.  Does anyone know what could be...

Cisco ASR, having internet 100 mbps link, we monitorthis interface in prtg, in prtg under 60-Min & 30 Sec Intervalit shows normal utilization e.g. for out - 25 to30 mbps & for in - 20 to 25 mbps. but when i change scanning interval time in prtg from ...

I can confirm this bug in another release of NX-OS. Please update known affected releases in bug CSCuv42794. 2016 Mar 19 14:56:41.289 hostname %DAEMON-2-SYSTEM_MSG: fatal: no matching cipher found: client 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc se...

Hello,Trying to download running config from x20 routers as batch job using Prime 2.2.Actually I need to run the following commands using Prime's user-defined CLI template:#copy running-config tftp:Address or name of remote host []? 1.2.3.4Destinatio...

Hi, Again i hit undocumented features in CPI - lost track on how many we're up to now. Hopefully someone else have seen this syslog message before? Event Dispatcher was flooded with events and some were lost total:1 since last congestion notificat...

Hi All, Is there any option for Cisco Prime Infrastructure 2.2.0 to 3.0 Inline upgradation ? If yes, Can anyone please send me the procedure. I just happened to noticed in the Cisco Website that there is no inline upgradation. And i have been found o...

I'm trying to run the following command on a range of devices: copy tftp://10.10.10.10/new-acl.txt running-config The command is in enable mode and interactive, it prompts for confirmation of the filename. Here's the CLI template I've cobbled toge...

Dear Friends, im working On CiscoWorks 4.0  since last Fours years with 100 Licences, Now my organization wants up gradation in this regards i want your suggestion required , comparison sheet required which i convenience my management. like features...