Network Management

Hello everyone.How do I see Port-channel 1.700 loading like Port-channel1?3900-SPE100/K9#show interfaces po1 | i rateQueueing strategy: fifo5 minute input rate 12862000 bits/sec, 2569 packets/sec5 minute output rate 12802000 bits/sec, 2558 packets/se...

Hi I'm using buildin DHCP on FTD, but I need to find what hostname has DHCP client. Is there any way to find it on device? show dhcpd binding all command shows only ip address and MAC address. 

Hey, I'm working on this project and could use some help. I'm trying to show that Quality of Service optimization for a network is way better than regular optimization. I'm using Cisco Packet Tracer to illustrate the network design before (no Quality...

So, I currently have an ‘ip access-list extended OUTSIDE-TO-INSIDE’ so if I am correct and there can only be one OUT-TO-IN list, I assume I’ll have to add these to that.Would this be correct; ip access-list extended OUTSIDE-TO-INSIDE   70 permit tcp ...

So my CISCO 3925 ROUTER has IOS 15.7(3)M6 I can only find Documentation for 15.3(3) and 15.6(3)... they are Basically all 15.x M&T Versions...I guess my question: Is there going to be much Difference in the Documentation that I use?? 

Hi all,  need help in figuring out how when any user runs clear arp-cache, the command doesn't actually execute.  Its easy to do it with IOS but with XR I am having trouble coming up with a script.  Any ideas?  XR doesn't have privilege commands and ...

Dear team ;I'am not able to log into CIMC , i get that error message This application requires Flash Player v9.0.246 or highernow the Flash Player is not supported, i don't know how to do to fix that issue thank in advance for your helpAdd tags

Hi Guys,I want to review the alerts that has been generated by Cisco PI, especially the one generated from custom monitoring policy. I have been looking into the system but so far got nothing. The details that I want to have is the severity of the al...

We have Cisco ISEs that are set up as a primary and secondary, they both have essential and device admin licenses. Both have a quantity of 2 essential licenses and each have 1 device admin license. Before configuring the servers in a distributed depl...

What is Default Data Sending interval for Netflow Monitor in Cisco Router? As per our NMS OEM it should match with NMS server's data collecting interval which is 2min for our case.

Hello, I use ISE Posture in my job - I'm an end user, not somebody who works in network security, so please bear with me if I don't use all of the correct terminology - and I've been having no end of trouble with it. I've spoken to multiple people on...

The following info has been given on the LAN I chose and I will attachEach branch has an internet connection, but this connectivity is currently primarilyused by employees for surfing the web.- Secure WiFi is required for all employees at all LANs, a...

Hello, Im hoping if I can get some help here. I recently configured a router/modem to bridge mode. The connected to the modem/router to WAN 1 on the Meraki Firewall. I also configured the firewall to pppoe with the right crendential that I got from t...