Network Management

Hello, I'm going to migrate from LMS 4.2 to Prime Infrastructure. A demo version of PI 3.0  looks very promising.  But I  can't  find "Chassis View"  functionality (CiscoView in LMS). Device visualisation (especially for wired devices) is very impor...

No matter what I do, I can't seem to get an EEM script to send a message to all VTY lines. I am sure it is something ASCII related, but not sure what the fix is. I have a script that, for now, collects all currently logged in users as my test, and t...

hi sorry for the rookie questionconfiguring an ASA and having issue getting it set up.We're putting this in place between our subnet and the office wifi router (hence the strange outside IPcan ping ok from outside to 192.168.1.1but cannot from inside...

Hello Community,I am experiencing problems when trying to generate EOS/EOL report in LMS 4.2.5 on a soft appliance. It fails because Compliance Policy and PSIRT/EOX Job fails therefore there is no data in LMS to do the report.. I attached the logs of...

Deployed Prime Infrastructure 3.0 on a pro spec'ed virtual appliance.  Has anyone had any success with the PSIRT and EOX reporting?  I see it as an option and can schedule a job (by scheduling it seems to run immediately).  But I never see any data. 

Guys, can smbd tell me if Cisco Prime Infrastructure supports sFlow? Thanks.

When enabling the SNMP proccess on a Cisco router or switch by configuring an SNMP v1/v2c community, it also automatically enables SNMPv3. The issue is, that no mater how much I restrcit SNMP access with ACLs, the IOS device will always respond to SN...

Hi everyoneI'm working on narrowing down the alerts and events, so I get emails only when a device is unreachable. Eventually, I'd like to continue with specifying ports on these devices as well, like trunk ports and whatnot. As of right now though, ...

a very important NMS customization option is to decide which interfaces are important and which not for alerting...How is this possible in PI?I want to differentiate between important uplink ports and e.g. unimportant client ports - and as a conseque...

I would really like to use IOS's archive feature, but can't figure out a way to do it securely. Here's the conundrum:FTP allows me to store the encrypted credentials ("ip ftp password") in the config, but the file transfer is sent clear-text on the w...

Good Morning, We have been using LMS 4.0.1 to backup our device configs for over 5 years now. As of last week 90% of our devices are coming back partially successful. We have never had this issue before and have done a restore using a verified backup...

Hello, I have a Cisco 2960 switch that keeps immediately errdisabling the port when a user plugs in his laptop.  However, he can plug in the laptop into another port (configured the exact same) and it will work just fine.  Also, on the port that kee...

Hi, I'm new to TCL/EEM, with some help from my friend Google I was able to create a small script that resides on the flash of a switch and it looks like this : ::cisco::eem::event_register_timer cron name ipsla_to_syslog.tcl  cron_entry "59 23 * * *...

Dear Cisco, I would like to ask one question. Does cisco support sftp for backup configuration? thanks.