Network Management

Good morning, I am updating the archive configs on a Cisco 3750-X at work and when I try to execute the command, logging persistent, I get this error "Secure filesystem not supported. configuration log persistency feature not enabled." I have tried G...

Hello everybody, i've tried to work with eem (great tool). But there is one Problem - i start the eem applet (event none) and the cli prompt interrupts my self made query befor the maxrum=900 is reached. It takes approximately 15 seconds and the the ...

Hello,I have installed a new version of LMS 4.2 on virtual appliance (VMware 4.1) and I have an issue. When I go the "Device Administration --> Manage Device State" I have the following error : Server ErrorErrorError in communicating with DCR Server....

Has anyone run into issues with Prime Infrastructure (specifically v:3.0) discovering devices in VSS? I not only receive alarms from my other monitoring tools during the discovery of my 4500-X (VSS) but it appears that PI doesn't discover the modules...

Hi all , I,m getting a error ========================================== 1760896: Nov  2 2015 11:34:21.231 UTC: %SNMP-SW1-3-INPUT_QFULL_ERR: Packet dropped due to input queue full 1760897: Nov  2 2015 11:34:27.183 UTC: %SNMP-SW1-3-INPUT_QFULL_ERR: Pa...

hi ,did anyone faced this issue with PI 2.0 on VMware environment .even after reimage its same status CiscoPrime/admin# show application status NCSHealth Monitor Server is starting.Ftp Server is runningDatabase server is runningTftp Server is running...

Hi, We are using nexus 5k in our DC. Today it gave an alert that it is rebooted. when we checked the logs, it was just an NTP time reset. this has happened earlier also. My concern is, why it is giving reboot alert on every ntp time reset?  Please r...

I can't use Aux port for ASR 1006, becouse i can't find it in configuration. Version: asr1000rp2-advipservicesk9.03.07.05.S.152-4.S5.bin"router#sho line ?  <0-16>       First Line range  async-queue  Show async-queue  console      Primary terminal li...

Hello, I'm going to migrate from LMS 4.2 to Prime Infrastructure. A demo version of PI 3.0  looks very promising.  But I  can't  find "Chassis View"  functionality (CiscoView in LMS). Device visualisation (especially for wired devices) is very impor...

No matter what I do, I can't seem to get an EEM script to send a message to all VTY lines. I am sure it is something ASCII related, but not sure what the fix is. I have a script that, for now, collects all currently logged in users as my test, and t...

hi sorry for the rookie questionconfiguring an ASA and having issue getting it set up.We're putting this in place between our subnet and the office wifi router (hence the strange outside IPcan ping ok from outside to 192.168.1.1but cannot from inside...

Hello Community,I am experiencing problems when trying to generate EOS/EOL report in LMS 4.2.5 on a soft appliance. It fails because Compliance Policy and PSIRT/EOX Job fails therefore there is no data in LMS to do the report.. I attached the logs of...