Network Management

Hi everyone, I have configured a switch to generate SYSLOG message for every successful and failed Admin logon. our usernames are quite long (FQDN/username) so syslog doesn't show full username. 12-16-2015 09:24:08 Local7.Notice 172.XX.X.107 9678: D...

We have Appliance Backups (full backups) for a Cisco Prime 1.4.0.45 installation . ncs_appliance_backup-150722-1900.tar.gpgncs_appliance_backup-150729-1900.tar.gpg The hardware was replaced and the Cisco Prime operating system was re-installed from D...

Hello ! Please tell me where the mistake: ## ip sla 10 icmp-echo 8.8.8.8 source-interface Cellular0 frequency 360 ip sla schedule 10 life forever start-time now track 10 ip sla 10 reachability delay down 20 up 20 ip sla schedule 10 life forever star...

Is there a way in Prime 2.2 to view interfaces that are unused and up like there was in CiscoWorks LMS? I can't seem to find a report like that.

Trying to get the PSU status and getting odd responses. Is there a table that list what the responses mean to a specific query.  I have a number of C series servers. I use SNMP to index the PSU and tell me the status. Server 1.PSU Index = 1PSU Index ...

I have a Cisco 3650 stack with IOX v3.6.3 operating with AIR2702E wireless access points.  When the APs are connected directly to my 3650 they configure and operate normally.  However, when connecting via another switch model (3750) connected to my 3...

Hi all, I have a problem in some 2950 switches in my company: We have an office connect to our headquarter via MPLS link with one default gateway, so we have another link redundant with other defaut gateway. When MLPS shutdown, our checkpoint firewal...

I am struggling with one last piece of subnetting that I can't quite make sense of. Given an IP address and a subnet mask (i.e. 172.25.0.0 255.255.252.0) how many valid subnets and usuable hosts can I get?  Thanks.....Neal Huhn

Hi, Can someone please confirm if we can setup a SMSC/SMPP server on Prime Infrastructure to send alerts through SMS. Or is their any other way I can send alerts through SMS.  For SMS gateway I'll using an online site which will generate an API. I...

I am unable to get a Successful collection from one of my devices. It is a Cisco 5508 Wireless LAN Controller. I am successfully running collections on many devices of this same type and software version (7.6.130.30), so I know it's not a limitation ...

Unter "Network Devices" / "Device Type" / "Wireless Controller" in Menu "Configure" the option "refresh config from controller", which should be the 2nd entry, is missing. In Prime 2.2, whose backup was used for Prime 3.0, this option is avaiable. Is...

In  the  dashboard - Cisco Nexus  1000v  our VMWare ESXi with VEM are listed twice, once with IP-Address and once with FQDN. The latter is in error status, whereas the ip-address listed has a " green"  status.Anybody a clue why Cisco VSUM is not able...

Hello all, I am setting up a 6504 router to replace our current 6506, as we do not need the extra slots. We are also upgrading from SUP2s to SUP720s in the process. Here is a show mod on the new chassis, using software s72033_rp Software (s72033_rp-A...