I have cut at this multiple times and have not been able to work it, so any help would be greatly appreciated.I have a 3650 with one interface connected to our ISP's router and another interface connected to our UTM and the internal network. I want ...
Hello Team,Hope you are all well.I have this challenge when i try to run a playbook to back up network devices.am attaching the playbook config and the error.- name: AUTOMATIC BACKUP OF RUNNING-CONFIGhosts: Core_Switchgather_facts: trueconnection: lo...
Bonjour, Je dois mettre en place une interconnexion entre un MX64, un PABX et une Livebox 100 Orange, pour que depuis le réseau interne on accède au PABX et donc à la téléphonie (logiciel de Softphone), mais également depuis la connexion VPN via le M...
For those SLA probes that support one-way delay statistics, e.g. UDP Jitter, does the one-way delay measurement always require a Cisco endpoint using ip sla responder feature?Thanks!
I need to log only the input of some commands and some events (for example, a successful / unsuccessful user login). Is it possible to filter generated EEM logs using TCL script and send them to an external syslog server? I wrote a script and set up ...
Hello, I need find the SNMP MIB for monitor my users connected by VPN SSL on my Cisco ASA 5525.I don´t know if this it is possible or no.Any tip about where I can find this MIB please post here.thanks
Hi @All I am trying to monitor Cisco ISE device in a NMS, while SNMPv3 configuration of the ISE device i asked to specify the host(NMS) Engine ID. Does Cisco ISE device does not supports automatically discover the SNMP manager engine ID during the in...
Hi I wanted to enable my ISR Firewall in addition to my FPR Firewall and wanted to check and verify this would be safely implemented and didn’t miss anything.My main interest aside from blocking everything I don’t want in was to allow each network In...
I'm trying to figure out how to change the management ip address thru console access on a Cisco Firepower 2130 device. I factory reset the device and it gave the default management ip of 192.168.45.45, I want to change it, but can't figure it out. I ...
Dear Community,I would like to run a command on ACI where it is possible to see on each contract having the IP_ANY filter who is the Consumed and who is the Provider.APIC Version: 4.2(7f)Currently I was able to extrapolate which contracts use the IP_...
Hello communityI am checking the certificate issuer for cisco.com and they have one of the most secures ones, HydrantID Trusted Certificate Service. However since I am Linux user, I try to get the things done in the Linux way and surprisingly I found...
How to check ping test to a certain IP from Cisco FMC
HelloCurrently I am running WireGuard VPN as a docker container on a VM but I wanted to see about having RA VPN access on my Cisco infrastructure instead. It seems google has a plethora of configurations and examples but no defining answer; Can this ...
I have to track and monitor BOOTFLASH for which i need total free flash space for the entire flash memory device as a whole, instead of each partition's free space.Is there any EEM script for the above ?Device: Cisco IOS XE Software, Version 17.09.0...
How do you do,I have a project to automate the configuration management of Cisco switches with the IaC platform Terraform. How do I set up the interface between my Cisco Catalyst 9200L and the Terraform platform?
