Network Management

Resolved! How to use snmp get from IOS CLI?

I recently found that I can generate snmp get requests from the Cisco IOS CLI. It's not available on all IOS versions I guess, but on the Cat6509 platform with IOS version 12.2(33)SXI11, I have it. The problem is though, that each time I try to gener...

LMS 4.2.3 Continuous Authentication failure alarm in DFM

Hi All,We are getting continuous minor alarm[Authentication Failure] for single router in the DFM. can we check from which ip we are getting the authentication request??possible steps to find the cause for the authentication failure.? Regards,Channa

How to snmpwalk the CPUs for Cisco3750 and CiscoASR901

Hi, Experts:How to snmpwalk the CPUs for Cisco3750 and CiscoASR901? I found that Cisco CPUs can't be got by snmpwalk ENTITY-MIB. But there is some values in CISCO-PROCESS-MIB. Why there is no CPU info in ENTITY-MIB?

Not able to update value for rttMonEchoAdminTargetAddress object in some devices

Hi , I am able to create new ICMP echo IP SLA test using SNMP Set requests , but when I try to update the target address of the created test I am getting the below error -------------------------------------------------------------------------------...

Resolved! cli templates prime 2.1

HII was wondering. Is it possible to run a CLI template that does the following. 1. Running the CDP neighbor command to find out who the neighbors are.2. And automaticly entering a description command on the interface with the hostname and IP that it...

Resolved! Router Configuration

Hi, I am a student at an academy and I messed up my router... When trying to change the configuration registry, I accidentally entered 0x2132However, before I could fix it I had to leave. The next day, the router no longer responded to hyperterminal....

EEM script is not detecting message ""%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."

am trying to execute below script and its failing can some one help? event manager applet nano-1event syslog pattern "%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."action 1.0 cli command "enable"acti...

Cisco Prime- Netflow Export Issue

Dear All,We are observing high bandwidth being utliized between ASR1004 and Cisco Prime 2.1 after enabling "ip netflow exporter". Is there any way to mitigate it..?

Resolved! PI 2.1 Change SSH encryption / hash?

Is there any way to change the SSH2 encryption and hash settings PI 2.1 uses to connect to it's managed devices? Right now it is using AES-128 and MD5, but I would like to change it to AES-256 and SHA1.

A serious problem for LMS 4.1

Hi guys, 1.When I want to add a CPU alarm, prompted me:"MessageFailed to Create Alarm !Cause1)Could be invalid value for some of the entries 2)Could be due to lack of access to the host,invalid SNMP credentials or a busy device.Action1)Verify ...

How Cisco represent Arp entry's aging time in SNMP MIB

Hi there,I found : when a laptop roamed between an office and a meeting room and used two different IP addressed in these two places, there are two active IP arp entry in Cisco with different aging time.Please see the screenshot for "sh ip arp". My...

Resolved! SCP IOS Image Upgrades in Prime Infrastructure 2.1 Failing

Hi I'm running PI 2.1 with all the latest patches and packs but I can't get SCP Image transfers to work.When I check the suggested logs from the Jobs Dashboard (and jump into the CLI root) I see the following:[SWITCH-DEVICE]=Switch Hostname[SWITCH-A...

WS-C2960C-12PC-L Unkown Console Settings

All,I have a WS-C2960C-12PC-L which I am trying to access. The console settings have been changed from the default and the configuration is unknown as the switch used to be a test switch. I am unable to determine any usable information via CDP Neighb...

LMS 4.2 User Tracking not enabled

Hi all,I have an issue on some switches located on remote sites.For all switches on the main site (where LMS is located) User tracking is enabled.For switches on the remote sites, user tracking seems not to be enabled.This means we can't run the recl...

Cisco Prime Auth/priv

Hi All I am trying to put 2 new Nexus 5600 switches on Cisco PrimeThe snmp works as i have tested it elsewhereHowever when i put the switches on i get the following ...SNMP Failure :Invlaid security level Steve

Network Management

Forum Posts

Resolved! How to use snmp get from IOS CLI?

LMS 4.2.3 Continuous Authentication failure alarm in DFM

How to snmpwalk the CPUs for Cisco3750 and CiscoASR901

Not able to update value for rttMonEchoAdminTargetAddress object in some devices

Resolved! cli templates prime 2.1

Resolved! Router Configuration

EEM script is not detecting message ""%CISCO400R-6-SIM_ACTIVATION: SIM in slot 1 is being activated. Please wait for modem to come UP."

Cisco Prime- Netflow Export Issue

Resolved! PI 2.1 Change SSH encryption / hash?

A serious problem for LMS 4.1

How Cisco represent Arp entry's aging time in SNMP MIB

Resolved! SCP IOS Image Upgrades in Prime Infrastructure 2.1 Failing

WS-C2960C-12PC-L Unkown Console Settings

LMS 4.2 User Tracking not enabled

Cisco Prime Auth/priv

Cisco + Splunk: It's a new day for your data.

Speed & Tech: Unveiling the Cisco-McLaren F1 Partnership

Congratulations to all the August-October 2023 winners!

A new chapter of the Spotlight Award begins!

Announcing Resources That Guide You to Success

Router Modem and CRC Relationship

Migrating Cisco IOS Config to Nexus

open file with Web browser

Documentation

Cisco ISE licensing not working/updating

event syslog pattern syntax doesn't work

Issue with VTP * MD5 digest checksum mismatch on trunk: Po1 *

Cisco ASA Firewall - all icmp thru the FW

Can't connect to web configuration for Firepower 1010

Adding Helper IPs through CLI for PXE boot (hand-holding required)