Hello all, Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. b...
Hi everybody, We are performing a migration from LMS 4.2 to Prime Infrastructure 2.1 and we are realizing that some features are not in this new platform.I suspect that one of them is syslog forwarding by email. In our old LMS we collect some syslog ...
We are running Prime LMS 4.2.5, we added 3850 switches from the same model and same hardware, we found that the failed devices have different OID. failed: 1.3.6.1.4.1.9.1.1745successful: 1.3.6.1.4.1.9.1.1641 Is there any workaround for this problem
Hello, I encountered an interesting behavior on the Cat 3550 switches. First, I configured the vty 0 4 and vty 5 15 with transport input telnet and when I issued the sh run command this is the output I received(what you'd expect to see): sw1#sh run |...
In the "Cisco Prime Infrastructure 2.0 User Guide" it states:Prime Infrastructure logs all emergency, alert, and critical messages generated by all devices that aremanaged by Prime Infrastructure.Prime Infrastructure also logs all SNMP messages and s...
Hi, i have odd issue for some reason the port speed in the wired clients shown a wrong speed,can some explain how the speed detremained and why i'm getting a wrong speed port of 10mb for a pc/host when my network is at least 100mb, thanks
I'd like to find out how to implement MAC address access control on CISCO881-SEC-K9 router, I have a small customer network and I need to deny access to all devices except those that I want to access the internet. I've attached a sample config of the...
Hi,we are using Cisco Prime Infrastructure 2.0 as our central device discovery and inventory for all network equipment. Then we export the database to multiple other systems, primary through the REST API. My question is if anyone have used the PI API...
I'm looking over the documentation (reference) and experimenting with a system and it appears that an ASA's Netflow records cannot be properly parsed and read by Prime Infrastructure. (It appears the same holds for a Nexus 7010 but I've not tried to ...
Hi all,Is there an equivalent to ios_config on nx-os? If there is, can it handle config-sync? Is this something I should be focusing on using TcL & expect from a linux box rather than the tcl installed on the devices?
hi i configured snmp v3 in nexus switch as following :username user1 password pass1 role vdc-operatorsnmp-server user user1 vdc-operator auth SHA pass1 priv aes-128 pass2 localizedkey i tried to connect to this switch via one snmpv3 client (devi...
Hi Guys,I have CE routes that connect to many internal 3G devices and also connect to MPLS network. I am trying to make an audit on those CEs to confirm service KPIs including delay, jitter, and packet loss. what would be a recommended tools to do th...
Hey guys. I recently started working for a company that has sticky macs configured on their switches. I need to replace a computer so I need to delete old sticky and make a new one.Somehow I am stuck because when I try to search for the old MAC, it s...
