Network Management

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Prime 4.1 Fault problem

Hello, I have Prime 4.1 on windows with the latest update, it is up and running except for few devices ASR903 routers that are not being recognized in the Fault (DFM). These devices are supported in this release wThe fault is showing that the devices...

LMS 3.2 forbidden

Recently installed LMS 3.2 and now when I try to log in I get the following:ForbiddenYou don't have permission to access /cwhp/LiaisonServlet on this server.Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to h...

rmetro by Beginner
  • 1054 Views
  • 5 replies
  • 0 Helpful votes

Resolved! SNMP Walk Issue from LMS

Hello Experts,I tried SNMP walk from LMS for below OIDS  but getting the error as attached..MIB Name :- c2900PortDuplexStateOID's : 1.3.6.1.4.1.9.9.87.1.4.1.1.311.3.6.1.4.1.9.9.87.1.4.1.1.32But while i do with OID 1.3.6.1.4.1.9.5.1.4.1.1.10 its showi...

EEM with redundancy inter-device

Hi,I'm putting together a tcl script to read the cisco IOS CA  server certificate requests (pending, granted, etc) in CLI and make the results available via SNMP expression MIB. The two CA servers are configured as a redundant pair with redundancy in...

dmitry by Beginner
  • 1846 Views
  • 6 replies
  • 0 Helpful votes

Upgrade CNR 6.2 to 8.1 : db error

Hello,I try to upgrade CNR 6.2 to 8.1. When upgrading from a pre-7.2 cluster to 8.1, a plateform-specific tool cnr_mcdexport is required. This step is ok: I migrate 6.2 to 6.3 and, with the cnr_mcdexport, I extract the data from the MCD database 6.3 ...

problem with Watchdog Event

i'm trying to build an applet that will reset modem (819 , 888 , 1841 ) routers every 1 hr when the track reachability is down i wrote thatevent manager applet RESET_MODEM event track 100 state down event timer watchdog time 3600 action 1.0 cli comm...

LMS UPGRADE

Hi all,I need to update to the latest version a lms 2.5n , i see on the cisco portal the Following guide:Ordering Information for CiscoWorks LMS 2.x/3.x Existing Customers 1. Determine the license count for your existing CiscoWorks LMS 2.x/3.x produc...