Network Management

Hi,What kind of mode is available at event_register_cli mode option.I tried with the interface ( config-if ) mode parameter but it was wrong.KSZ-R1(config)#event manager policy exit-config.tclRegister event failed:Invalid argument "interface"    whil...

Hi Experts,Can Any one help in Blocking Web site for example Facebook on Cisco ASA5510I used the below configuration on Cisco ASA5510 but did not blocked any web site"regex blockex1 "facebook\.com"regex blockex2 "youtube\.com"class-map type inspect h...

Where are syslogs stored, if I point my devices to Cisco Prime acting as my syslog server? I am running 2.0thanks, Jerry

We are having issues with getting our new LMS 4.2 license installed. We are using a VM and dont ever see the license file in the GUI no matter what we have tried. THe license file we recieved was a .lic  file, so I presume this is the correct one .. ...

Hi,The EEM TCL script registration should be done the folowing mode .::cisco::eem::event_register_cli pattern "^interface (.*)$" sync yes skip noThe router send the following error during event registration.KSZ-R1(config)# event manager policy intf-c...

The situation is the following. I've downloaded the Cisco Embedded Automation Systems  Installer from the offical site http://www.cisco.com/en/US/prod/iosswrel/ps6537/ps6555/ps10777/eas_sol_downloads.htmlI copied it on one test system running IOS ver...

Hi All,I would like to monitor our MC3G60 linecards on our UBR10k systems by SNMP,and found this OID:cefcModuleUpTime - 1.3.6.1.4.1.9.9.117.1.2.1.1.8(ciscoEntityFRUControlMIB)when I try to walk this OID, the system returns a 'No Such Instance current...

Hello,I was going to enable IP SLA feature in my 2921 router. It's running IOS 15.1. However, I couldn't find SLA number options.Router#sh verCisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M1, REL            EASE SOFTWARE (f...

Hi All,     Right now dot1dTpFdbPort(.1.3.6.1.2.1.17.4.3.1.2) OID is being used to find the mac address of the devices connected to a particular switch. It is being found out by passing the VLAN ID and dot1dTpFdbPort OID in the community string.(This...

Hello,I was wondering if there is such configuration as forcing the switch/router to do the following:When someone telnets to the device the device will output 'Use SSH instead' and then closing the session.This is something similar to 'password requ...

Hi,    We currently use KIWI syslog but can anyone recommend a better product for syslogs from Firewalls, Routers and Switches. Our current product creates a seperate text file per day per device. Ideally I would like all these to be combined (or com...

Hi.The MWR2900 router has a known bug for Marvel chip, which causes the CPU utilization to spike.https://tools.cisco.com/bugsearch/bug/CSCtz75800The workaround is the command "clear mac-address-table secure"I've written the following EEM applet to is...

So upload and configured the top.tcl on one of our remote routers, but getting an error when trying to run the script;flow record FlowRecord1 match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port mat...

Hi,Is there anyway I can update the version of EEM on a switch without updating the IOS?Don