Dears,i need a documentation or a procedure to how make integration LMS 3.2 with microsoft active directory to make usernames of devices appear in end hosts reportsThanks
Setup: LMS 4.2 Soft applianceHow can I restore the log rotation gui configuration back to default settings? For some reason the screen is now completely blank after making no changes. I have attached screen shot of a working server and a screen shot ...
Dear , We are getting the below mentioned error while installling Cisco Prime LMS 4.2.1 evaluation version on WIndows 2008 Enterprise R2.We tried installing on a high end VMware server .Prerequisites are all take...
Dear Experts,I would like to define a general policy for our company to set the log buffer ("logging buffered xxx"). Currently, most of our configs use the default value of 4096, which does not store much of the history. I'd like to see more, when lo...
Recently upgraded our install from 1.0.2.29 to 1.1.0.58 and started recieving alerts from NCS about usage on this disk space being over 50% used. Didn't change any settings/retention periods during the upgrade so not sure why this alert started comi...
HelloI have to install Prime LMS 4.2 on ESX customer infrastructure (ova image as soft appliance).The customer would like to know if LMS 4.2 is compatible with his backup agents : * Symantec Veritas Netbackup (v7.1.0.2)* Control-m (v6.4.01.300)If n...
Hi!I got a couple of questions regarding Cisco NCS (Network Control System) Version 1.1.0.58.1. I've just installed Cisco NCS appliance(Red Hat) in vmware vsphere and l need to backup and transfer a Backup Repository to a Windows FTP Server. I can re...
Is there a way to change the interface speed in Cisco Prime LMS. I need to change the speed as the High Utilization alerts are directly dependent onh it. The default speeds on ADSL ports are configured for 1 MB but the actual link between the ISP is ...
Hello,We have an installation of Cisco Prime LMS 4.1 soft appliance on VMware and i would like to ask if it is possible to backup the database on an external drive other than the 'local' LMS hard disk. Is it possible?Regards,Nicos
We currently do not have any VMWare configurations. Do we need to have an existing VM server to deploy the virtual appliance. I have been told it comes with an instance that I can deploy. We have a server that is new and beefy with plenty of RAM ...
I been away from LMS since release 3.2. Am now interested in what has changed since then. 1) Is LMS now available for Redhat Linux ? 2) Is HUM included with an unlimited license for LMS or is HUM still a seperate add-on ? 3) Is Cisco Prim...
Hi,We are facing the snmp Walk issue with some of the Router's having same IOS/same make & model as some other Router's working fine with snmp. Router SN:FHK103416F9snmp walk: not working Router SN:FHK104118PNsnmp walk: working fine thereIOS ru...
Most of the management software that I've seen seems to gather information about a device by polling the device and grabbing the first interface in the ifindex list.I would like to -force- a selected interface to ifindex 1. Is there a command that w...
Dear All,We are getting the following error at the RTMT. We are using the CUCM 7.1. Any idea?: 0: May 19 18:01:49.274 UTC : %CCM_CAR_SCH-CAR-3-CARSchedulerJobError: CAR scheduled job failed. Job Failure Detail:CAR Scheduler restarted, update ALL 1 jo...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.jpg "VIP Mentor"){kind=icon}
