Network Management

Hi,Someone knows what is the ios specific to hsrp ?  I´m looking for in this link but i have doubt. http://tools.cisco.com/Support/SNMP/do/SearchOID.do?objectName=hsrp&searchMode=exactmatch&search=Search&submitValue=SUBMIT&jumpToPage=1&step=1It is ne...

We are looking to deploy Prime Infrastructure in a managed services capacity to monitor multiple customer networks.  We would like to configure two routers on a customer WAN to perform IP SLA testing and be able to monitor and alert on it in Prime.  ...

We are running 356oX switches, all on 12.2(55)SE3. We found the TDR command but are getting a lot of "not completed" messages when checking lines. We get that on multiple switches, and multiple ports. The ports cn be connected to cisco phones, AP's' ...

Hi All,I have a cisco 3745 router on a network I manage. of late I have had with one of the links I manage. the issue is that when a tcp connection is being established from an external network to my internal network, the traffic does not go past the...

          Dear,I would like to upgrade LMS4.2 to PI1.2. According to Cisco this is a minor upgrade (requires the SAS code) and can be downloaded from the Cisco portal for free. My question: Can I still reuse the license and the B2B cisco support I us...

Hello, We encounter a duplicate entry for "site groups" after upgrade from Cisco Prime Infrastructure 1.2 to PI 1.3.This is visible under the Lifecycle view.Have you ever seen this issue ?Anyone know how to remove one of it without losing data ?Thank...

Hello.I'm using a FWSM with multiple contexts. One of these contexts serves CiscoWorks LMS.I need to manage all others contexts on outside interface using insecure protocols, like SNMP or Telnet.I have tried to setup a VPN L2L connection between cont...

I am unable to add ASR1002X routers to my inventory due to failure reason "device not supported".  Is this device type supported for LMS 3.2.1?RME ver 4.3.2

Hi All,      Here are my situation:      1、After upgrading successfully from DCNM 6.1(1b)  to the newest version 6.1(2), I found that the tool "Preferences" of DCNM-LAN client didn't work. When clicking the button or enter "ctrl + I" , it  responded ...

Is there a way to run a a TcL script that checks the MAC Address table, compares it to the ARP table, does an NSLookup for each entry, and gives a list of interfaces with the hostname of the device that's attached?  I did see Joseph Clarke wrote a sc...