Hi there,There is a Cisco setup here at the school iv just started working at that was set up some years ago. The password for the wireless is 63 digits as you can imagine this is a right pain when having to type it in on mobile devices. So I decided...
Hello all,I have the following problem: our 3LS is a 3560G switch on which I cannot enable netflow. In order to be able to monitor traffic, I have connected a 2811 router onto the network with two fastethernet connections (one to be used for mgmt and...
Hi All, Here is the situation: I have set the LMS SMTP option and administrator email ID, then tried to send the email about inventory report for testing the lms notification. However, it can't work. Using the WireShark to check, i f...
I have a customer who is trying to download the Ciscoworks Common Services 3.2 device updates. Unfortunately, the zip file is not on cisco.com. The is a common services 3.3 device updates zip file, but the earlier one is missing for some reason. Any ...
Hi All, I have a project to upgrade LMS3.2 to a new PI 1.2. my current plan is 1. build a new VM to install LMS 4.22. backup LMS 3.2 ( not SP1)3. import 3.2 data to the new 4.2 machine 4.build a PI 1.2 and import 4.2 data into PI 1.2 5. run the devic...
Hi, I am installing CWLMS-3.0-5K-K9 suite.While adding a device ,I am getting error in LMS console "DCR server is down...Please start DCR server".From where i can start it?
Hi allWe are investigating on switching over from CDP to LLDP. And im trying to find out information on what devices support LLDP.We have 22,000 devices. Ranging from 3750/3560/2960/6500 and ASR1000, 7200, 2800, 3800, 2900,3900All the catalysts do s...
Hello,I'm trying to use Cacti to monitor active DS0 utilization on my ISR voice gateways. These range from 2811 - 3845 platforms. I'm a little at a loss for what OID to query.I've tried: 1.3.6.1.4.1.9.10.19.1.1.9.1I even ran an SNMP explorer on this ...
Hi,I need some help from anyone who may have used EEM/Tcl on IOS XR to achiev something close to this:A link experiences high packet loss, input errors or any degradation and the EEM script is supposed to take these example actions:Increase the metri...
Does anyone have any notes/tips on how to Configure ACS 5.x so LMS 4 users can authenticate via TACACS+? I have ACS 5.x setup and authenticating to Active Directory. Have changed the LMS 4.x Authentication Module to TACACS+. Hav...
I have a network running some 20 switches, two controllers and many AP's. All the devices that should be able to connect to cisco network assistant can successfully. However there is one switch that will show in neighbours but will give the message...
Hello All,I ran into a problem a few weeks ago and am still trying to figure out why either the 3560 switch or our Cacti syslog server did not alert us when one of our ports was experiencing heavy CRC and Input errors. I had upgraded the IOS to 12.2...
I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpageI've gone through most of the posts with similar heading but none of the instructions helped resolve t...
Hi allIm looking into LMS for network management, particulary my network device patch management. Can anyone tell me if the prime LMS system can automatically deploy new IOS to my devices, and also can it do a scan and recommend IOS updates to me for...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
