Network Management

Hihow can i backup ASA/PIX configuration using tftp/ftp in Prime LMS 4.2.2?--I discovered those devices and can managed them in the LMS but in the config file backup the passwords are encrypted,that's why i want to backup them with tftp/ftp.thanks

Hello,Could you help me on resolving problem with creating Certificate Signing Request for Cisco LMS?I performed the following actions for it creating:1. I  created Self-signed certificate using the following link:  Admin/Trust Management/Local Serve...

I have ASA running version 8.2.5 and using snmp v3 as below;snmp-server group Authentication&Encryption v3 privsnmp-server user SNMP_TEST Authentication&Encryption v3 encrypted auth md5 cisco123 priv aes 128 password123snmp-server host IN 10.10.10.11...

I've downloaded Prime Infrastructure 1.2 eval and wanted to see what it looked from WCS that I am currently using to manage the wireless network and I added the WLC (4404) device but it list the device as  "Managed with Warning" and I can't find what...

Hi,I have LMS 4.2 and switches 3560X, 3750X running IOS 15.0(1)SE3. I have enabled Energywise on them but the Energywise Dashboard is not showing some endhosts.When I enter to the switches and enter "sh energywise children" the endhosts are displayed...

Hey guys.Need some serious help with one of the default pollers.The "All Devices_CPU_Utilization" Poller is stuck in Instance Polling and I dont know how i can get it out of that status.Ive tried:Deleting the problem node that it was stuck with and r...

Hello EveryOne , ACS5.2 time sync breaking once in near around one month and not able to authenticate after that  .I am using domain controller (Windows Server 2008 R2) as NTP server for ACS .What is the reason for it , is there any bug in 5.2 releas...

Dear All,We are running LMS 4.1.Here we are facing some problems in taking config backup.Latest config backups are stored into E:\CSCoPX\files\rme\dcma\shadow.I have configured daily backups as a job and I couldnt find the location. I can see some co...

Greetings. I have DNS resolution enabled on my routers so that I can connect to things via hostnames. But one thing that I would like is if there is a way to disable DNS resolution when the router outputs information. For example, when I run a "show ...

Hello,We are running LMS Prime 4.2.3 on a Softappliance. We have a Cisco Switch behind a Non Cisco Layer-3 Device. In the end host tabe we see only the MAC-Addresses of the host connected to this switch. No IP-Address. The corresponding IP-Addresses ...

Hello Community,Can someone please show me how to convert the following EEM into Tcl?I need action 4 to produce a carriage returnevent manager applet backerevent noneaction 1 cli command "enable"action 2 cli command "copy running tftp:" pattern "Addr...

Hello,we are trying to install certificates from our CA on our Cisco Prime Infrastructure 1.2What we get from our colleagues is a file in .pfx format, containing an exportable key and the whole certificate chain.On the prime server, using openssl 0.9...

Is it possible to create a template to allow an operator / level 2 support person to put a port in a vlan using variables?ideally the operator would run the templat and input switch IP and Port #.the end user right now is using network assistant beca...

LMS Version is 4.2.3 /var/adm/CSCOpx/log/SyslogCollector.logLogging System Initialized.System Initialized.Queue Cap 100000Cannot create FcssLogReader.Unable to resurrect connection to a subscriber.