Network Management

Hi Guysi have an ACS Appliance 5.x but the LMS 4.2 doesn't;t recognize it as Cisco device , and give him the sign ? how to make LMS 4.2 recognize it as acsthanksibrahim

Hi,It is possible through EEM/TCL Scripting, to apply different policies for traffic shaping for certain periods of time?Having for example an Internet connection of 100Mb, when the LAN interface is achieving 100Mb, apply a policy permitting shaping ...

Hello ,I am currently deploying the Cisco Prime Infrastructure (VM) in a customer's LAN network , the questions I have are the following :1. Can i use multiple partitions for the deployment ? i.e , two partitions .2. After deploying the prime , if ne...

Hi,After i discovered my network i have tried to use netconfig  and i was unnable to use it, i have selected the device and the the task  with no problem but at  the "add task" area it dosen't show anything at the "Applicable Task"areaAny ideas what ...

Hi Netproat the Archival Summary failed part the reason behind the failure is as below , pls how to solve this issue and let lms download all configuration from the devicesTELNET: Failed to establish TELNET connection to 10.1.1.9 - Cause: Authenticat...

Everytime i start CCP with WIN 8 i start as an admin, it shows up but the bottom of the page is white with the main GUI a small box, and its not discovering anything with gns3 i have connectivity and have configured the router and loopback and everyt...

Hi GuysHow to generate a Report for all ur existence  Subnet's using LMS 4.2?thanksIbrahim

Hello CommunityCan someone let me know if there is an script that will show when a configuration change has been made and what the change was?CheersCarlton

Hello All,Can someone point me to where I can find tcl scripts to troubleshoot OSPF issues?CheersCarlton

Can ASA 5510 be configured as bridge mode and still send Netflow info to a collector?We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between th...

Can ASA 5510 be configured as bridge mode and still send Netflow info to a collector?We have a PIX connect internal network to internet. Because PIX does not support NetFlow, as a temporary solution, we were thinking of putting an ASA 5510 between th...

When configure ASA to transparent mode, does it still send netflow info out to a collector?

Hi,I have installed Cisco Prime Infrastructure 1.2 separately from LMS4.2. LMS4.2 is in production. I just want to run PI1.2 in parallel with LMS4.2 before migrating to PI1.2. Currently I have LifeCycle permanent license. Why don't I have the assuran...