Cisco IOS XR / NCS-5500
Q.
Why am I not getting BGP Source origin AS on the netflow monitor-map?
In "show flow monitor MYMONITOR cache location 0/0/CPU0"
BGPSrcOrigAS is always 0
flow exporter-map EXPORTER
version v9
!
transport udp <port>
source Loopback0
destination <ip of collector>
!
sampler-map SAMPLER
random 1 out-of 4000
!
flow monitor-map MYMONITOR
record ipv4
exporter EXPORTER
interface <Peering int>
flow ipv4 monitor MYMONITOR sampler SAMPLER ingress
router bgp XXXXX
bgp enforce-first-as disable
address-family ipv4 unicast
bgp attribute-download
network x.x.x.x/xx route-policy <policy-name>
....
RP/0/RP0/CPU0:xxxxxx(config-fmm)#record ipv4 ?
destination IPv4 Destination Based NetFlow Accounting
destination-tos IPv4 Destination Based NetFlow Accounting TOS
peer-as Record peer AS
<cr>
Thanks,
