11-24-2013 10:05 PM
Do we need both snmp ro and snmp rw on the switch and router in order to make them communicate with PRIME INFRASTRUCTURE 2.0?
11-25-2013 03:49 PM
You'll need the R/W community String:::
11-25-2013 10:45 PM
Hi ,
RW in only required if you need to make any changes on the devices via PI.
most of the communication can happend with RO.
Thanks-
Afroz
11-25-2013 10:50 PM
Thank Afroz!
11-25-2013 11:07 PM
Add devices in using RO and you will see many different logs and messages similar to Managed with Warnings and things like that.
When users see messages like this, they get alarmed and wonder why....
Save your self some headache and put them in RW-
I mean seriously, how many times have you had disgruntled employees come in after hours and go out and push config changes to your Cisco switches?
11-25-2013 11:13 PM
Also, if adding your Wireless devices in using Read Only, get ready for lots of problems, lots of headaches and lots of overtime chasing your tail around in circles
11-25-2013 11:14 PM
Thanks Rod for your explaination!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide