01-13-2014 09:30 AM
I've been digging through Cisco's SNMP Object Navigator without any luck, so I'm turning to the masses to see if someone has an answer.
I'd like to know if there is a supported MIB on the C3560G platform (for any IOS version) that will report the QOS port trust state on a given switchport. Although not necessary for my current needs, it would be nice if there was a way to report the other fields produced by the "show mls qos interface" IOS command.
Thanks!
-- John
01-13-2014 10:00 AM
There are some MIBs which will be of your interest :
CISCO-PORT-QOS-MIB
This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 switch/Router Platform(s).
CISCO-CLASS-BASED-QOS-MIB (For show mls qos int):
is MIB provides read access to Quality of Service (QoS) configuration and statistics information for Cisco platforms that support the Modular Quality of Service Command-line Interface (Modular QoS CLI).Configuration information available through this MIB includes all ClassMap, PolicyMap, Match Statements, and Feature Actions configuration parameters.
CISCO-SWITCH-QOS-MIB
This MIB module extends the CISCO-CLASS-BASED-QOS-MIB by defining configuration and statistics information specific to the quality of service (QoS) features of Layer2/3 switch functionality implemented in Cisco devices. It is applicable to a device which is fully within a single QoS domain, although one or more boundaries with other QoS domains can be immediately adjacent to this device.
Statistics available through this MIB includes:
+ Per module Multi-Layer Switching QoS statistics.
+ Per interface QoS queueing statistics.
You can check this link to check what all MIBs are supported on a perticular IOS :
http://tools.cisco.com/Support/SNMP/do/MIBSupport.do?local=en&step=3
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **
01-13-2014 11:49 AM
Vinod,
Thank you for your response. I was already aware of the CISCO-PORT-QOS-MIB (supported by the 3560G) and CISCO-SWITCH-QOS-MIB (not supported by the 3560G) MIBs. After reviewing the CISCO-CLASS-BASED-QOS-MIB (supported by the 3560G), I see no specific OID that would retrieve the information I require as it mainly pertains to the MQC.
I found two OIDs that appear to represent the data I'm trying to collect. The first one is csqIfTrustState from the CISCO-SWITCH-QOS-MIB. Unfortunately this appears to be supported only on the 6500/7600 devices. The second one is caqIfOperTrustState from the CISCO-CATOS-ACL-QOS-MIB, which is a legacy MIB for the old CATOS software.
Please let me know if I overlooked a specific OID from the MIBs you pointed out or if there are any alternatives you can think of. Thanks!
-- John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide