I have 140pcs CISCO CATALYST 3560CX-12PC-S and about 10% of these have the following issue in the console.
%ILPOWER-7-DETECT: Interface Gi0/2: Power Device detected: Cisco PD
%ILPOWER-5-POWER_GRANTED: Interface Gi0/2: Power Granted
%ILPOWER-5-IEEE_DISCONNECTED: Interface Gi0/2: PD removed
These 3 messages keeps repeating and clogs up the console. The strange thing is that a RJ45 cable is only attached to the Catalyst and no POE unit. See attached picture1 below.
As you can see in the attached picture it is not always the same port and can be on multiple ports.
We have tested many different cables including brand new Cat6a cables.
TDR is no point in testing as this triggers with a RJ45 cable attached and "Power inline Never" is not a solution.
Is there any way to disable the Cisco PD and keep the IEEE PD or other suggestions?
For me Looks like Bug - what version of code running, worth upgrade to latest and test.
i seen in other model example :
I have about 20 of 3560CX-12PD-S, also running 15.2(7)E1 and never saw this. May be a "lemon lot"?