03-06-2020 11:39 PM
hello all,
I have a network of branches with dual internet connection from different ISPs and I have brought up two DMVPN connections one on each ISPs connection for failover now when a link from ISP1 doesn't go completely out but starts giving me about 4-15% packet loss my branch will switch back and forth from primary link to secondary link and back to primary this goes on and on until either I manual shut down ISP1s link in my router or the packet loss goes down to 0 meanwhile all my VOIP sessions are getting dropped and people complain about bad connection now I have IP SLA configured to change my route if the first ISP goes down but I need a way to both to change my default route and failover to secondary DMVPN Tunnel when ISP one start getting packet loss more than 2 percent. basically I want to change a link based on quality.
I really need your help.
03-07-2020 01:19 AM
Hi,
If you make use of SLA, combine it with EEM in order to necessary config changes and re-route your traffic.
Regards,
Cristian Matei.
03-07-2020 02:19 PM
You can do with IP SLA based on the Quality of the link
example :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide