cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1232
Views
0
Helpful
2
Replies

Cisco 2960x power inline

elmudthir
Beginner
Beginner

Hi everyone

Am facing  a problem with 2960x series switch
it doesn't gives power on interfaces for Avaya IP Phone

here is the configuration 

Switch(config-if)#power inline consumption default 5000
Switch(config)#do show power inl
Switch(config)#do show power inline

Module   Available     Used     Remaining
          (Watts)     (Watts)    (Watts)
------   ---------   --------   ---------
1             n/a        n/a         n/a
Interface Admin  Oper       Power   Device              Class Max
                            (Watts)
--------- ------ ---------- ------- ------------------- ----- ----




2 Replies 2

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend
Post the complete output to the command "sh version".
Judging from the output to the command "sh power inline" it may seem the switch doesn't support PoE.

Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0(2a)EX5, RELEASE SOFTWARE (fc3)

 

Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 28 WS-C2960X-24TS-L 15.0(2a)EX5 C2960X-UNIVERSALK9-M

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: