cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1187
Views
0
Helpful
1
Replies
Jason Fraioli
Participant

Cisco 3550, CiscoWorks, SNMP mib ifindex

As you can see from the output below, in some cases the numeric port number does not equal the mib's ifindex.  However, I believe CiscoWorks CiscoView is using the snmp ifindex when applying VLAN memberships.

For example:

1) Open the VLAN membership configuration in CiscoView.

2) Set port 47 to be in vlan "x" and apply changes.

switch#show int status: reports that port 43 has been changed to vlan "x", not port 47 (see below: FastEthernet0/47: Ifindex = 43).

Anyone know how to get around this?

Thanks,

-- Jason

Details:

Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(44)SE6

NameVersionLicense Status
CiscoWorks Common Services3.1.0Licensed
Campus Manager5.0.1Purchased
CiscoView6.1.6Licensed
CiscoWorks Assistant1.0.0Licensed
LMS Portal1.0.0Licensed
Resource Manager Essentials4.1.0Purchased

switch#show snmp mib ifmib ifindex

FastEthernet0/24: Ifindex = 20

FastEthernet0/37: Ifindex = 45

FastEthernet0/26: Ifindex = 26

FastEthernet0/35: Ifindex = 35

FastEthernet0/17: Ifindex = 13

FastEthernet0/42: Ifindex = 38

FastEthernet0/9: Ifindex = 9

FastEthernet0/15: Ifindex = 23

GigabitEthernet0/1: Ifindex = 49

FastEthernet0/40: Ifindex = 48

FastEthernet0/20: Ifindex = 16

FastEthernet0/33: Ifindex = 33

FastEthernet0/22: Ifindex = 18

FastEthernet0/31: Ifindex = 31

FastEthernet0/13: Ifindex = 21

FastEthernet0/46: Ifindex = 42

FastEthernet0/11: Ifindex = 11

FastEthernet0/44: Ifindex = 40

FastEthernet0/3: Ifindex = 3

FastEthernet0/1: Ifindex = 1

FastEthernet0/48: Ifindex = 44

Vlan500: Ifindex = 53

FastEthernet0/28: Ifindex = 28

FastEthernet0/39: Ifindex = 47

FastEthernet0/7: Ifindex = 7

FastEthernet0/19: Ifindex = 15

FastEthernet0/5: Ifindex = 5

FastEthernet0/36: Ifindex = 36

Null0: Ifindex = 51

FastEthernet0/25: Ifindex = 25

FastEthernet0/34: Ifindex = 34

FastEthernet0/27: Ifindex = 27

GigabitEthernet0/2: Ifindex = 50

FastEthernet0/43: Ifindex = 39

FastEthernet0/16: Ifindex = 24

FastEthernet0/41: Ifindex = 37

FastEthernet0/8: Ifindex = 8

FastEthernet0/14: Ifindex = 22

FastEthernet0/32: Ifindex = 32

FastEthernet0/21: Ifindex = 17

FastEthernet0/30: Ifindex = 30

FastEthernet0/23: Ifindex = 19

Vlan1: Ifindex = 52

FastEthernet0/47: Ifindex = 43

FastEthernet0/12: Ifindex = 12

FastEthernet0/45: Ifindex = 41

FastEthernet0/10: Ifindex = 10

FastEthernet0/2: Ifindex = 2

FastEthernet0/29: Ifindex = 29

FastEthernet0/38: Ifindex = 46

FastEthernet0/6: Ifindex = 6

FastEthernet0/18: Ifindex = 14

FastEthernet0/4: Ifindex = 4

1 REPLY 1
Nael Mohammad
Contributor

Can you post a screenshot of the error from CiscoView? Also you are running an older version of LMS, you should download LMS 3.2 which is free to upgrade from an 3.x version.

Windows:

ftp://ftp.cisco.com/pub/LMS/lms32win.zip

Solaris:

ftp://ftp.cisco.com/pub/LMS/lms32sol.zip