Cisco 3560 Switch IP SLA Command Not Recognized

[Samrat Bose]

Hi, please help me anybody. I have a Cisco 3560 switch running in IP ROUTING mode. It's running with c3560-advipservicesk9-mz.122-37.SE.bin operating system. I'm facing a problem with this device, as whenever I want to configure IP SLA, it's showing Unrecognized Command.

The following commands I want to type:

ip sla 1

icmp-echo 202.129.196.3

frequency 10

exit

ip sla schedule 1 life forever start-time now

But, while typing the commands, the output shows unrecognized command. Can any body help me with this, as which IOS I should have to install for this configuration?

Thanks in advance.

[Martin Hruby · Accepted solution]

Hello Samrat

The IP SLA feature on your switch is supported on the Cisco IOS version 12.2(40)SE and later, so you should upgrade preferably to the latest 12.2(55)SE10

I recommend you have a look at the Cisco Feature Navigator to see which features are supported on your platform: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

Best regards,
Martin

[Samrat Bose]

Thank you Martin, I'll do this..