Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1149
Views
0
Helpful
0
Replies

cisco 3850 return incomplete table LLDP local ports info by SNMP

YuryKozlov
Level 1
Level 1

‎02-22-2019 12:18 AM

Hello.

I have a stack 2 x WS-C3850-24XS with version 16.3.7

I try to get info LLDP local ports by SNMP protocol

 

$snmpwalk -c pub -v 2c stack3850 1.0.8802.1.1.2
...
iso.0.8802.1.1.2.1.3.7.1.3.1 = STRING: "Te1/0/1"
iso.0.8802.1.1.2.1.3.7.1.3.2 = STRING: "Te1/0/2"
iso.0.8802.1.1.2.1.3.7.1.3.3 = STRING: "Te1/0/3"
iso.0.8802.1.1.2.1.3.7.1.3.4 = STRING: "Te1/0/4"
iso.0.8802.1.1.2.1.3.7.1.3.5 = STRING: "Te1/0/5"
iso.0.8802.1.1.2.1.3.7.1.3.6 = STRING: "Te1/0/6"
iso.0.8802.1.1.2.1.3.7.1.3.7 = STRING: "Te1/0/7"
iso.0.8802.1.1.2.1.3.7.1.3.8 = STRING: "Te1/0/8"
iso.0.8802.1.1.2.1.3.7.1.3.9 = STRING: "Te1/0/9"
iso.0.8802.1.1.2.1.3.7.1.3.10 = STRING: "Te1/0/10"
iso.0.8802.1.1.2.1.3.7.1.3.11 = STRING: "Te1/0/11"
iso.0.8802.1.1.2.1.3.7.1.3.12 = STRING: "Te1/0/12"
iso.0.8802.1.1.2.1.3.7.1.3.13 = STRING: "Te1/0/13"
iso.0.8802.1.1.2.1.3.7.1.3.14 = STRING: "Te1/0/14"
iso.0.8802.1.1.2.1.3.7.1.3.15 = STRING: "Te1/0/15"
iso.0.8802.1.1.2.1.3.7.1.3.16 = STRING: "Te1/0/16"
iso.0.8802.1.1.2.1.3.7.1.3.17 = STRING: "Te1/0/17"
iso.0.8802.1.1.2.1.3.7.1.3.18 = STRING: "Te1/0/18"
iso.0.8802.1.1.2.1.3.7.1.3.19 = STRING: "Te1/0/19"
iso.0.8802.1.1.2.1.3.7.1.3.20 = STRING: "Te1/0/20"
iso.0.8802.1.1.2.1.3.7.1.3.21 = STRING: "Te1/0/21"
iso.0.8802.1.1.2.1.3.7.1.3.22 = STRING: "Te1/0/22"
iso.0.8802.1.1.2.1.3.7.1.3.23 = STRING: "Te1/0/23"
iso.0.8802.1.1.2.1.3.7.1.3.24 = STRING: "Te1/0/24"
iso.0.8802.1.1.2.1.3.7.1.3.25 = STRING: "Te1/1/1"
iso.0.8802.1.1.2.1.3.7.1.3.26 = STRING: "Te1/1/2"
iso.0.8802.1.1.2.1.3.7.1.3.27 = STRING: "Te1/1/3"
iso.0.8802.1.1.2.1.3.7.1.3.28 = STRING: "Te1/1/4"
iso.0.8802.1.1.2.1.3.7.1.3.29 = STRING: "Te1/1/5"
iso.0.8802.1.1.2.1.3.7.1.3.30 = STRING: "Te1/1/6"
iso.0.8802.1.1.2.1.3.7.1.3.31 = STRING: "Te1/1/7"
iso.0.8802.1.1.2.1.3.7.1.3.32 = STRING: "Te1/1/8"
iso.0.8802.1.1.2.1.3.7.1.3.33 = STRING: "Fo1/1/1"
iso.0.8802.1.1.2.1.3.7.1.3.34 = STRING: "Fo1/1/2"
iso.0.8802.1.1.2.1.3.7.1.3.97 = STRING: "Te2/0/1"
iso.0.8802.1.1.2.1.3.7.1.3.98 = STRING: "Te2/0/2"
iso.0.8802.1.1.2.1.3.7.1.3.99 = STRING: "Te2/0/3"
iso.0.8802.1.1.2.1.3.7.1.3.100 = STRING: "Te2/0/4"
iso.0.8802.1.1.2.1.3.7.1.3.101 = STRING: "Te2/0/5"
iso.0.8802.1.1.2.1.3.7.1.3.102 = STRING: "Te2/0/6"
iso.0.8802.1.1.2.1.3.7.1.3.103 = STRING: "Te2/0/7"
iso.0.8802.1.1.2.1.3.7.1.3.104 = STRING: "Te2/0/8"
iso.0.8802.1.1.2.1.3.7.1.3.105 = STRING: "Te2/0/9"
iso.0.8802.1.1.2.1.3.7.1.3.106 = STRING: "Te2/0/10"
iso.0.8802.1.1.2.1.3.7.1.3.107 = STRING: "Te2/0/11"
iso.0.8802.1.1.2.1.3.7.1.3.108 = STRING: "Te2/0/12"
iso.0.8802.1.1.2.1.3.7.1.3.109 = STRING: "Te2/0/13"
iso.0.8802.1.1.2.1.3.7.1.3.110 = STRING: "Te2/0/14"
iso.0.8802.1.1.2.1.3.7.1.3.111 = STRING: "Te2/0/15"
iso.0.8802.1.1.2.1.3.7.1.3.112 = STRING: "Te2/0/16"
iso.0.8802.1.1.2.1.3.7.1.3.113 = STRING: "Te2/0/17"
iso.0.8802.1.1.2.1.3.7.1.3.114 = STRING: "Te2/0/18"
iso.0.8802.1.1.2.1.3.7.1.4.1 = STRING: "TenGigabitEthernet1/0/1"
iso.0.8802.1.1.2.1.3.7.1.4.2 = STRING: "TenGigabitEthernet1/0/2"
iso.0.8802.1.1.2.1.3.7.1.4.3 = STRING: "TenGigabitEthernet1/0/3"

A problem is I have no info about ports below Te2/0/18.

Its a bug?

 

 

Labels:
0 Helpful
0 Replies 0
Customers Also Viewed These Support Documents