02-18-2022 03:14 AM
Hi Community,
I need your help to perform an IOS upgrade, below is the current version:
c7600rsp72043-advipservices-mz.152-2.S1.bin
The needed version is:
c7600s72033-advipservicesk9-mz.122-33.SRE5.bin
This is about a dual SUP card as below:
Router#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1649TJJ5
2 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1739D7WD
3 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1608534D
4 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL12372V3V
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE SAL1645RXXK
6 2 Route Switch Processor 720 (Hot) RSP720-3C-GE SAL1650UCVV
Could you please advise on the right procedure to follow?
02-18-2022 03:15 AM - edited 02-18-2022 03:17 AM
@zizou6500 wrote:
Could you please advise on the right procedure to follow?
Wow! That is one big and significant DOWNGRADE.
Are you really sure you "have to" do a downgrade?
If downgrade is required, read the Release Notes because you need to be very certain the line cards are supported at 12.2(33)SR train.
02-18-2022 04:28 AM
Thank you.
Indeed I have to do this in order to align the IOS version with other devices in the production environment.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: